Random questions to which you seek an answer
-
They have not been hot soaked. They are brand new, just received yesterday with tags. They said sorry our website states we don’t pull tight when measuring, so I am out of luck for assuming they did like you guys do. I knew the policy of no return once hemmed. What I didn’t figure into the equation was a reputable Iron Heart Dealer that does not measure denim the same as IHUK does. They don’t pull it tight, and I figured a reputable place would. My loss. They will go on the buy sell board for $100 off and I’ll take the L. Just feeling a little salty.
-
@Nittpics Giles means that 21oz jeans are hot washed during production from IH, so no soak is going to do anything that hasn’t already happened. As for measurements, I’m afraid you’ll find that almost no retailer measures waists the “Iron Heart way”. The waist pulled tight is probably a thing, but most places do some variant of this from Rivet & Hide:
I’m sorry that you’ve had a frustrating experience! I hope that you’re able to get the right pair for you, soon.
-
@Nittpics I would reach out to them. It seems they made a mistake and should at least pay for a tailor if not a plain ol exchange. You read and followed instructions about sizing and measurements. They failed on their end.
-
Thanks everyone. Not trying to cry sour grapes. Was exited to start a fresh pair on the 1st and now it’s the 5th and I have a pair that’s too big. Also learned a hard lesson on which retail store not to deal with and just buy from IHUK, the reason I did not to begin with was they are out of stock in this size. Germany has a pair but I figured I’d buy in the US from a store I have in the past. (But now I no longer will) All good. I’m ready to sell at a loss and buy from Germany and move on.
-
Another lesson could be to buy them unhemmed, so you could try them on and then have them hemmed later, which I realize you wanted them by the 1st, but this would save agony and money.
-
Yea I always get mine hemmed a good 20-30 wears after wearing. That way I can get a better gauge as to the "shrinkage" from the setting of creases behind the knee. But I've got access to a Union Special 43200G in town, and I know most people do not.
-
@Mister_Brue said in Random questions to which you seek an answer:
Why is it that I cannot seem to find the “Tell us all what you’ve got” (as mentioned by @chrisjohnnick) Sub Forum straight from the homepage? Obviously I can follow his link, but apart from that it seems elusive. Thanks
It was homeless, for some reason. We have moved it so you can locate it on the homepage again
-
Do all iron heart shirts have the painted logo on the inside?
Hi all!
Thank you for this great forum and community.
I inherited my brothers wardrobe
so I am just learning about IH .
I noticed that this black and blue shirt does not have the painted logo on the inside like the other ones do.
-
@mantradeeksha Welcome to the forum and here is the answer to your question from when it previously came up:
@Giles said in IHSH-264-NAV - Ultra Heavy Flannel Ombré Check Western Shirt - Navy/Black:
Good evening guys and gals…I recently purchased a new IHSH-264 from a Stockist in the US and I noticed something a bit strange. Every other Iron Heart shirt I own (including 3 other UHF westerns and a newly acquired Wabash work shirt) have the "Genuine Quality Iron Heart -- Made in Japan" with the care instructions painted (or screen printed) inside the shirt on the left. However, this new IHSH-264 is completely blank inside. Is Iron Heart no longer including this cool detail inside the UHF flannels? Did this one slip past QC without the printing? Any insight would be greatly appreciated...thanks!
As a general rule, it is no longer being included.
-
Ah rats, same.
-
Yeah, it is a cool print it love it. Perhaps it is because the message wasn't always meant to apply to every garmet literally as it is stated. I recall a conversation on here not too long ago about that. Maybe a new message and print could replace it to keep it going in a different way.
-
No, it's because Haraki and Tom decided to get rid of it because of the cost. They did not ask us for our input unfortunately.........@Alex has lobbied for its return.
But one thing that you need to realise about the Japanese physche, is that westerners are very rarely right. This was best epitomised by a friend who started a brand and had some jeans made in Japan. He specced them with infinite detail, when the sample was delivered it was completely different. Upon cross examination, the Japanese workshop owner told him that they had ignored the written sizing spec and made them to a pattern that he really meant to specify.
For a time, said friend and I talked about writing a book together. The title of which was going to be something along the lines of The Challenges of Working in Japan. The sub title I came up with was "If they made what you asked them to make, they must have misheard you".....
-
@Matt said in Random questions to which you seek an answer:
I sure do hate that interior print. Stupid words.
Ahahah
-
Thank you very much !
-
Getting fed up with cold legs when out with the dog - am I right in thinking whipcord is the best material for cold-weather trousers/pants (within the IH offerings), and that the Division Road variant are the slimmest legged option? Wouldn’t necessarily opt for cargoes, but I am coming at this from 555s…
-
@Nocturama I love the whipcord for cold weather and have the cargo version. I can not wear them in warmer weather though.
As stated many times before, that really depends on a persons tolerance of hot and cold temperatures.