Random questions to which you seek an answer
-
@Mister_Brue said in Random questions to which you seek an answer:
Does a model/product that has been restocked for over four years (IH-526J-142ib) ever become ‘continuous production’ rather than ‘seasonal or limited run’?
I always thought that meant ‘when it’s gone it’s gone’? Just trying to figure out the parameters of the language used, because it genuinely makes a difference to purchasing priorities, especially with so much fire being dropped. I’m sure I’m not the only one.
Thanks.in this instance, just human error
-
Debating on removing the cargo pockets on my IH-714 black serge. Has anyone else done this on any of their IH cargo pants?
-
Only thing that bugs me about IH shirts is the gut crease. I made up the name. I've circled it in 2 pics. It looks like I have a big gut but it's just the crease from sitting. I imagine it goes away after washing a few times? The thicker the material the more pronounced the crease.
-
@Tago-Mago ...and what do you call it if you leave your jeans buttons undone.
-
This post is deleted!
-
Hello buddies. I received an IHB-11-NAT today and absolutely love it! The crew was nice enough to trim an XL to a L for me. Thanks @Bailey! My question is does anyone have any ideas as to what I could potentially do with this extra leather trim? Or how to make something out of it? It's a pretty cool and gorgeous piece and I would love to use it.
-
@Oaktavia You could do a few things with that, but the easiest might be to cut a nice strip that preserves the middle section with the two holes. You could bend the leather to align the two holes, and fasten them together with a Chicago screw. Now you're left with a short loop, a Chicago screw, and a long tail. You can put a split ring through the short loop, and it'll make for a nice little fob. I would also recommend trimming the ends of the tail (and the other end as well) in a visually pleasing way. I would probably cut it at an obtuse angle (any utility knife can do this. It's okay to take several light passes, rather than trying to cut through all of that thickness all at once) and round the corners that are left. Sandpaper works if you're not confident getting the corners rounded cleanly with a knife. The last thing that will make this look finished is, once you're happy with the final shape, lay it flat and bevel the edges. You can probably find a cheap edge beveler on amazon that would do the job, or stop by a cobbler and ask them to help. It'll take them about 10 seconds. Once the edges are beveled, you can burnish them with some water and a piece of canvas. Now it's time to put it all back together. And if you put the split ring in before you fasten it with the Chicago screw, it'll make your life a little easier. One last thing, be careful bending that thick leather and avoid trying to crease it. If it's too dry, it may crack. A little water can coax it along if needed, but it's probably better to let it naturally find its bend as you use it.
Hope this helps!
And if you want more information about beginning leather tools, I wrote up a pretty exhaustive list of everything you'll need to get started with leather. I haven't audited the links in a while, so some might be broken, but it's still a solid resource. https://zeebeeleather.com/blog/2015/6/20/so-you-want-to-get-into-leatherworking
Let me know if you need anything else.
And thank you for the kind words!