IH-666S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim Slim Straight Cut Jeans
-
@don_pipone thank you. Can easily stay at 35 then thanks
-
@CosmoSix5 I just soaked and washed a new pair of UHR 888s @35c. I had .5 inches of shrink in the thighs and everything stretched back to post soak/wash measurements after a few days. If it fits well pre wash it will be good.
-
@Daniel-San Good point. 25 oz is a staple of the brand and will be around for a long time. UHR it is.
-
Cant wait!!
-
alarm clock set
-
@Pointman measure your favorite jeans and theres your size reference.
-
@Pointman Remember these will shrink as they are literally RAW/unwashed denim, but will stretch back out in the waist, if they fit you out the box they'll stretch back to that in the waist...
-
Anyone had these stretch to more than the original? There is a bit of a gap in sizing and need to go slightly smaller than I was hoping.
-
We hemming at purchase while accounting for inseam shrinkage or leaving unhemmed? While I'd rather wait and hem mine later, any chainstitch job requires me mailing to someone or taking a roadtrip. Not ideal. I generally wear a 30 inseam, so I could hem just a few inches off to avoid having giant rolls. Like hem it to a 34 and be safe to hem again in the future.
I own too many pairs of jeans.
-
@Pointman The guide states that you could get up to 2” shrinkage of the inseam. If you want an end inseam of 30”, you could hem them to 32”. It may end up a little long, but would stack better.
Really depends on how you are going to wear them. Roll, straight leg, stacks, etc.
-
@Pointman , my inseam is around 31-30 depending on the cut.
When I ordered my last pairs of UHRs, I added 2.5 inches to the order.
Ex: Hem to 33.5 instead of 31.
-
IIY6 here I come!
-
@Ross Spent 3 hours going backwards and forwards thinking I won't buy / will buy cos the sizing is on the small side. Fingers crossed!!!!
-
Grabbed a pair. Looking forward to these.
-
@jpvisual said in IH-666S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim Slim Straight Cut Jeans:
In any given tag size in the chart what is the tolerance up or down? Example if the chart says thigh 12 inches, what is the maximum up or down of that number?
-
@jpvisual It's hard to give an exact amount, as it can vary. Some areas tend to have very little fluctuation and are usually quite consistent, such as the leg opening. For measurements like the waist or thigh, though, you might see a variation of around 0.4" either way. That said, even that isn't always possible.
If something ever looks slightly too small or big your best bet is to email us with what you need, or place the order leaving a note for that request and we can let you know the best available with what is available.
