IH-555-XHSib - 25oz Selvedge Denim Slim Jeans - Indigo/Black
-
Im always on the hunt for a pair of XHSbb.....would be amazing for IH to make this happen again
-
@Notchas If you are size 32 or below:
https://forum.ironheart.co.uk//post/877100Can't imagine them doing these ever again since they seem to be so tough to sell.
-
@johnlegion as @Oaktavia said it had happened in the past and but was abit before my time and it didn't have the best traction and ended up going into the outlet, so we probably wont do the XHSbb again, that being said you never know if the hype is there who knows what could happen, but nothing on the docket atm I'm afraid.
-
I would get them, no doubt.
-
Anyone that have experience of shorten/hemming a pair of 555..? Because of the tapered leg. Do the end hem after shortened make them tiny wider or “much” wider?
I’m struggling on what cut I want for the XHSib return… the 555 or the 666🫣
I would probably be a size 34 in both options IF they haven’t changed a ton on the new upcoming batch. And I would need them shorten to 34”.
Anyone with experience from this?
-
@mecken88. If you are planning to hem at 34 inches the difference in hem width will be very small.
-
@Jett129 sounds great! In size 34 the hem is 8” =20,32cm.
And I have a pair of old Wrangler Cowboy cut with a hem of 20,5cm that works great for me an engineers.
My current pair I’m rockin, have a hem of 8,85”=22,5cm, that on the larger side for me. I prefer a hem closer to 8”. Smaller is not and option, but ever so slightly is probably okey too.So I’m trying to figure out where my range of okey lays. So 22,5cm is too big. 20,5cm is on the smallest side.
That’s why I was curious if a pair of 555 is shorted 2” to a 34” leg. If the hem would widen, and if so, how much
Otherwise 666 is on my mind, those have a hem of 8,4” in size 34 on the last batch. But have a significant lower rise in the top block.
So I’m really struggling to figure out if the 555 or the 666 is the option for me
️IG: mecken
Conner Oberst - True Blue 2005
”Cause kid, I don't know much about you
But I like you
'Cause you're true blue” -
@mecken88 all my 555s are 36 and hemmed to 30.5 because I don't really cuff or do a small cuff, the hem is about 8-8.25" and looks great, engineers work fine with them !
-
In theory will be:
Original inseam? 36.5
Hemmed inseam? 34
Knee? 8.5
Hem? 8.0
8.053191489361701See more at:
https://forum.ironheart.co.uk//post/5662 -
on the topic of hemming, is it advisable that i should keep the cut off pieces for future repairs? instead of getting rid of them.
-
Primary purpose of off-cuts is protecting carbon forks from being scratched by protruding bolts.
It seems unorthodox, but I guess they could also be used for repairs.
-
-
@grapefruit just follow this thread and check the updates to the release calendar. Best bet. They do release videos right before on Instagram but they're usually on the calendar at least a week in advance. For this you can also sighn up for restocks directly from the items page.
I'm excited for this release too.
-
@grapefruit I’m keen for these in 888 and or the 555 cut too. I’m yet to have purchased a pair in 25oz and if it’s anything like my 3 pairs of 21oz IH jeans then it’s should be really bloody good.
-
excited for this pair too! @CosmoSix5 signed up months ago! @Aussie-Ben after all the fade pictures, i am very much looking forward to this as well. going to be my 2nd pair of 25oz
-
@grapefruit
Reckon I won’t be wearing em in summer though, how do they go in your climate? -
@nurunuru said in IH-555-XHSib - 25oz Selvedge Denim Slim Jeans - Indigo/Black:
Primary purpose of off-cuts is protecting carbon forks from being scratched by protruding bolts.
And the socks?
"OK face up to it - you're useless but generally pretty honest and straightforward . . . it's a rare combination of qualities that I have come to admire in you" - Geo 2011
-
@Aussie-Ben my climate is summer all year round but it still works.
