IH-526L - 19oz Left-Hand Twill Selvedge Denim Type III - Indigo

[V-P]

@aimes Yes, but it looks like it might end up a little tight. What are you wearing underneath? How do want to wear it? Open with a t-shirt? Closed with a shirt/hoodie? You can estimate the amount of expected shrinkage, see my previous posts from around the most recent restock.

[Yoprst]

@aimes said in IH-526L - 19oz Left-Hand Twill Selvedge Denim Type III - Indigo:

Fit check before wet soak please. Do I have some room for shrinkage?

IMHO you surely do. From my point of view you have no choice but to shrink it a bit, cause it looks quite not your best fit right now (sleeves & shoulders). Simply soak/wash it in a lukewarm water, without fanaticism though and I'm pretty sure it'll fit you like a glove

[meatmarketdenim1]

@Yoprst
Def Agree with ya, think the fit will be spot on once soaked. Perfect with just t shirt and prob can layer

[Yoprst]

@meatmarketdenim1 honestly do not understand people who try to wear jean jacket as a coat, with hundreds layers underneath. Jean jacket is a jean jacket and should be worn as such. All above imho of course

[aimes]

Thanks all, looks like it will be a keeper with a warm soak. I'll keep soaking it hotter if I want more shrinkage.

@V-P said in IH-526L - 19oz Left-Hand Twill Selvedge Denim Type III - Indigo:

@aimes Yes, but it looks like it might end up a little tight. What are you wearing underneath? How do want to wear it? Open with a t-shirt? Closed with a shirt/hoodie? You can estimate the amount of expected shrinkage, see my previous posts from around the most recent restock.

Ideally, a flannel.

[catdad1]

@Yoprst I'll throw a denim jacket when working around sharp objects at work to prevent threads from coming loose from a flannel or sashiko for example. I've found the denim to be able to withstand thread pulls better. However I can also see the appeal of wearing only a t underneath in a casual setting.

[Yoprst]

@catdad1 @ work I wear all my denim (jeans/jackets/shirts) underneath coverall to prevent/avoid critical damage, as shipbuilding industry has quite tough working inviroment - metall all around, paint, welding etc.

[Yoprst]

BTW fellas, how do you wash your jean jackets in the washing machine - buttoned or unbuttoned?

[Mizmazzle]

@spitfiredealer why would you sell this beauty?? What a masterpiece.

[Mizmazzle]

@Yoprst unbuttoned for me

[Yoprst]

@Mizmazzle turned inside out, I understand

[Mizmazzle]

@Yoprst yes sir!

[spitfiredealer]

@Mizmazzle bit too snug

[V-P]

@aimes Sounds good! I would go for it, doing gradually hotter soaks is a good idea. I prefer a tighter fit on type 3’s personally

[aimes]

This jacket says not to run in the dryer (with all raw denim) but I feel like that would soften up this insanely tough denim if ran for a short time.

[jpvisual]

@aimes looks good. That's how mine looked. I soaked it 1hr 30c and then a cold wash, no spin. Fits perfect. That way It'll shrink about 1 inch in the sleeves and body. Everything else pretty minimal.