Iron Heart X Simmons Bilt Horsehide Western Shirt - The Pale Rider - Natural

[pechelman]

Something is definitely corroding in the snap, maybe a galvanic reaction thanks to the humidity and sweat. You could try cleaning the snaps with a few drops of alcohol, let it dry, followed by a minimal drop of something like obenaufs or another oil like flax, olive, sunflower, etc. Basically you want to get the salts and moisture out of there and keep it protected.

[indigostiff]

I had an unfortunate magic marker stain on my left forearm that I tried to resolve myself. Of course, it got worse. I sent it to Rago Brothers in NJ, who did a bang-up job on cleaning up the whole shirt. I'll post more pics when I get it back, but this is what they sent me.

Before...

... and after....

[Sean156]

@Sir_Cuffs-a-Lot Rad..

[indigostiff]

@Alex - what would be the price to pimp an entire pale rider? Asking for a friend... lol.

[Alex]

@indigostiff With Good Art?

[indigostiff]

@Alex yes, diameters accordingly.

[Alex]

So the best fit would be the 17mm, but I think (i am out the country) the snaps installed on the pale riders' male side are the smaller set. We would need to check out the feasibility of swapping them all out, but in theory, it would cost:

[indigostiff]

@Alex Thank you! The Pale Rider is already in possession - it's just the snaps here - I appreciate your looking.

[Eza]

@Giles I don't think I have ever seen anything more beautiful wow

[denim-dawg]

@Tobi Dude, your pics are so good! That shirt looks alive on you!! Spectacular!!

[Tobi]

Some more shots with the much neglected Pale Rider. Procrastinating in the home office
Still struggling with slightly tight chest and shoulders, and effects on the upper snap. Also: my initial ill advised soaking adventure left the placket quite wavy, and the "hunch" on the back below the collar never fully settled.
Anyway.. still a beauty

[DeeDee85]

@Tobi looking incredible!

[JoshC]

@indigostiff, @Alex is correct, we suggest using the 17mm snap for the Pale Rider if you're interested.

The male studs on the PR are slightly smaller than GAH snaps, so we may need to trim a little off the male stud to make it fit. However, given that the leather is quite thick, it might be okay to put it on directly. Our main concern is with the top collar snap, as that part is thicker than the rest of the shirt, but we are going to look into this and let you know.

if you do have any questions or queries, feel free to message me or Graham. We're here to help.

[FlavourFade]

@Tobi amazing shots!

[denim-dawg]

Yo! So three weeks into wearing this goblin wizard of a shirt, and it’s changing colour from being in the sun and what not. Fits like a fish in water. What are your thoughts on mustang oil or something? Or just let it rip? Take care

[Jett129]

@denim-dawg I really like what’s happening naturally with this shirt,and my vote would be for you to continue doing what you’re doing. I especially like the unevenness of the color as it’s exposed to the elements. You can always apply a conditioner,but once you do,you can’t un-ring the proverbial bell.

[pechelman]

Yours is the new leather right? It looks more hydrated and supple compared to what I recall the old leather feeling like when I got to try it on in Hamburg. That one felt almost dry and velvety and really thirsty.

Yours is looking good and id leave it be unless you see something that needs moisture to prevent cracking or whatever.

[indigostiff]

@denim-dawg Don't touch it! Yours is the "new version" - softer, with a slight sheen to it. The older ones are slightly sueded and less uniform in their appearance - perhaps why people were so quick to treat them.

I would keep it wild.

[Mizmazzle]

@denim-dawg my vote is keep it natty style!! Love how the natural veg ages untreated. Sometimes wish I never treated my bareback. But like mentioned, mine was the older velvety feeling leather. It seamed thirsty.

[yannis]

Any idea when it will be restocked?