IH-888S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim High Rise Tapered Cut Jeans

[RamblinRich]

Thanks @moskiitto that’s a pretty decent increase over the average. Cheers.

[cyclops]

@moskiitto thats good to know i wasnt sure what was possible when you ask them to give you a big or small tag etc

[goosehd]

This thread has now been fixed as well.

[moskiitto]

@cyclops same, wasn't sure if that much was possible but got pleasent surprise.

@RamblinRich cheers!

[VegaS10]

One thing that I noticed is that the front rise of these seems to be a bit higher than all my other 888s of the same size. Will this shrink at all in the first wash?

[jfox1980]

@VegaS10 it will shrink a tad bit with cold water or a little more if you hot wash it

[weftyarn]

195 wear days

[Luke_is_back]

@worn2fade @Alex Hey! Do you recommend going 1 size up for that jeans?

[goosehd]

@Luke_is_back The best way to pick a pair of UHR jeans is to find a pair that matches your ideal measurements upon purchase.

They will shrink upon the first wash, the waist will stretch back out to pre wash measurements, the thighs will stretch out some. The length will not.

Edit: sizing up may not be ideal especially depending on what you’re comparing it to. Also, sizing up often leads to a pair that are too big when they stretch back out.

A pair too big out of the bag often leads to jeans that will always be too big.

[jfox1980]

@Luke_is_back I went up one size based on the measurements and did a hot wash in the washing machine on delicate cycle. They shurk perfectly and fit great with a little stretch they have after. I personally like washing my unsanforized pants with hot water to get them as dense as possible to help with wear and tear for the future in my experience.

[CosmoSix5]

Excited to watch this launch tomorrow!

[Denimhead 0]

I need 34” exactly, thinking I go 33 w and request a pair on larger end of 33.

[worn2fade]

@Denimhead-0 the measurements between a 33 and 34 are basically identical aside from the waist. You’d be good going with a larger 33 or smaller 34, but if you need the extra thigh space or bigger hem I’d say go up.

[worn2fade]

@Luke_is_back I agree with what goose responded to you. In my case (with the previous UHR launch,) I went true to size (34,) in this case looking at the size chart, I would’ve went 34 as well.

[moskiitto]

@Denimhead-0 I am also thinking that's the correct choice for you.

[Nick]

[Nick]

The fade potential

[jakev513]

I have a sizing question, I'm a 39" waist, the thigh and other dimensions on the 38 are plenty big on the size chart, would I be better off ordering a 38 and asking for something on the larger end, or should I size up to 40? I am in the process of losing some weight (down 10, goal is another 10) but I know I shouldn't rely on that. Thanks!

[Jord]

@jakev513 That's a bit tricky with the measurements of this run, you could try your luck and try find closest to a 39" waist in this run if you leave a note, but I believe the size chart is just an average of all the waist measurements put together... Not sure what I'd do

[Tago Mago]

@jakev513 the best way to determine the correct size is to measure a pair that fits you well and compare to the posted measurement chart.

How to measure the IH way

If you are looking for one specific measurement your best bet is to either email the Crew at shop@ironheart.co.uk, or leave a note when ordering