IH-888S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim High Rise Tapered Cut Jeans
-
@DaveC Shoot for the goal weight, the money motivational alone will help achieve that goal
-
@Phil_NYC better to be a tad more loose than the opposite. I’d say check out the rest of the measurements, make sure you lean towards the one that would suit your thigh best. Also, if leg opening is a factor due to certain boots maybe sizing up would be better also.
-
@jdwaid said in IH-888S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim High Rise Tapered Cut Jeans:
@wjw said in IH-888S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim High Rise Tapered Cut Jeans:
@worn2fade you notice stretch beyond original raw measurements?
Wondering this too. I usually buy at 36” and then it stretches out to a comfortable dimension.
So with the raw denim, if I measure my worn-in sanforized pairs and they are measuring 37” after all the stretch, I should shoot for a 37” with the raw pair?
I think the best advice is to shoot for 37” in your case. 36.5” minimum. (Size chart sizing.)
EDIT: cause grabbing a 37” measurement one will drop it down to 36” and it shouldn’t stretch out more than it needs to. Just make sure all the other measurements are good for you.
-
@worn2fade appreciate that man. I laid out
my most worn pairs tonight and they measure about 37.5-37.8” in the waist, so it seems like I’ll want to use those dimensions as a starting point. It’s a bit of an uno reverse from typical sanforized sizing but the size charts seem to suggest this is the right strategy. Thanks to you and others I think I’ve wrapped my brain around it
-
@RamblinRich just as an example of recent 888-xhsib tag 34 was 34.2" waist. Both me and worn2fade asked for big waist and got 34.6".
-
Thanks @moskiitto
that’s a pretty decent increase over the average. Cheers. -
@moskiitto thats good to know i wasnt sure what was possible when you ask them to give you a big or small tag etc
-
@cyclops same, wasn't sure if that much was possible but got pleasent surprise.
@RamblinRich cheers!
-
-
@VegaS10 it will shrink a tad bit with cold water or a little more if you hot wash it
-
-
@Luke_is_back The best way to pick a pair of UHR jeans is to find a pair that matches your ideal measurements upon purchase.
They will shrink upon the first wash, the waist will stretch back out to pre wash measurements, the thighs will stretch out some. The length will not.
Edit: sizing up may not be ideal especially depending on what you’re comparing it to. Also, sizing up often leads to a pair that are too big when they stretch back out.
A pair too big out of the bag often leads to jeans that will always be too big.
-
@Luke_is_back I went up one size based on the measurements and did a hot wash in the washing machine on delicate cycle. They shurk perfectly and fit great with a little stretch they have after. I personally like washing my unsanforized pants with hot water to get them as dense as possible to help with wear and tear for the future in my experience.
-
Excited to watch this launch tomorrow!
-
I need 34” exactly, thinking I go 33 w and request a pair on larger end of 33.
IG - gratefuldenimhead (jeans and boots), Norseamerican (bicycles)
-
@Denimhead-0 the measurements between a 33 and 34 are basically identical aside from the waist. You’d be good going with a larger 33 or smaller 34, but if you need the extra thigh space or bigger hem I’d say go up.
-
@Luke_is_back I agree with what goose responded to you. In my case (with the previous UHR launch,) I went true to size (34,) in this case looking at the size chart, I would’ve went 34 as well.
-
@Denimhead-0 I am also thinking that's the correct choice for you.
