IH-634S-UHR - 21/23oz Raw Selvedge Denim Straight Cut Jeans - Indigo

[rimaarts]

@goosehd but that's the thing. I know waist will stretch more than enough. I know hips and tighs should somewhat stretch. But below knee won't stretch that much...

And like I said, I bought levis stf where I was happy pre shrink, but post shrink I realised id much rather have bought a size bigger...

On the other hand I bought samurai 25oz off eBay that were marked unsanforised, and they shrunk way way way less than my Lewis...

I don't like slim and tapered fits. And from iron heart only fit that sorta works for me is 634

[goosehd]

@rimaarts this is hard to say, but the UHR might not be the denim for you and you may have better luck with 21oz.

The UHR shrinks fairly uniformly, but trying to pick a pair that shrinks to your desired measurements and stretches only in the right places might be very difficult to do. If you pick a bigger pair then when they stretch out will be too big in areas that you don’t want, and a pair on the smaller size may be too small below the knee.

You probably will be best served asking the guys at IHUK for help. Drop them an email shop@ironheart.co.uk for further help.

[yannis]

@rimaarts.You are concerned about them not stretching below the knee on a 634? Unless your calves are the same size as your thighs I dont see how that can ever be an issue. I am not trying to be condescending but thats the first time I heard a concern about below the knee tightness on a 634 cut.

[wjw]

@Alex @ShopatIronHeart will we know before the release/new stock is gone if this will be the last run or not? Was really wanting to get 18v this year, but have FOMO if UHR is going away

[goosehd]

@rimaarts I’ve been thinking about your dilemma most of the day and I’m not happy with my response.

What I’m trying to say is that there is quite a bit of variability in how something will shrink and stretch, which is very hard to define precisely.

I’m not trying to steer you away from UHR, but trying to stress that if you have found a cut that works for you, you may have better luck with the variability removed from the equation.

UHR is fairly easy to size if you’re only dealing with one specific dimension that you worry about. In your case, it sounds like you’re worried about the over all fit and the silhouette changing from your desired look.

The 634 will not become a different cut when it shrinks, but your worry is valid. How much the calves shrink is an unknown and the possibility of them stretching back out is even more uncertain.

I wish I could say for certain that post shrinkage that it would fit as you desire, but I can’t. To be honest, I don’t know if anyone can.

Your best bet would be to find the waist that suits you best and hopefully it has a calves measurement that when it shrinks suits you and your goals.

I hope this is a bit better explanation of what I meant earlier.

[yannis]

@goosehd explained it perfectly. Haraki is a very smart guy and all of those nuances are taken into account. Thats why the UHR measurements start bigger than the rest of the fabrics. The shrinkage is accounted for. They will undeniably look like 634's after the soaking. Mine looks wise is indistinguishable from any other 634 I own. Part of the beauty of IH is consistency that we usually do not praise enough.

[AdamJ]

@Kasi soon

[Alex]

@wjw said in IH-634S-UHR - 21/23oz Raw Selvedge Denim Straight Cut Jeans - Indigo:

@Alex @ShopatIronHeart will we know before the release/new stock is gone if this will be the last run or not? Was really wanting to get 18v this year, but have FOMO if UHR is going away

To the best of our knowledge, this will be the final run. We want to keep making it, but we have been told that it maybe too hard. I would plan on this being the last, if you want a pair.

[Oaktavia]

I am stoked to grab a pair of these in the 634 cut. While I am super bummed this may be the last run, the sliver lining is I will end up with a pair of these much sooner had they been in regular production.

[wjw]

@Alex thanks for the clarity and transparency

[atlasfields]

634's in 14oz same sizing as these bad boys?

[Tago Mago]

@atlasfields the sizing guides for the recent runs of the respective denims can be found on the product pages:

• IH-634S-142
• IH-634S-UHR

Your best course of action is a comparison of the two using the compare tool:

Product comparison

Keep in mind that the dimensions may be different for the next run of either fabric

[atlasfields]

right'o! have a current 634 that fit. it's always the magic math on "new" ones that make this fun.

I'll wait for these to show up in the comparison tool.

[iamjustdanny]

@Alex said in IH-634S-UHR - 21/23oz Raw Selvedge Denim Straight Cut Jeans - Indigo:

@wjw said in IH-634S-UHR - 21/23oz Raw Selvedge Denim Straight Cut Jeans - Indigo:

@Alex @ShopatIronHeart will we know before the release/new stock is gone if this will be the last run or not? Was really wanting to get 18v this year, but have FOMO if UHR is going away

To the best of our knowledge, this will be the final run. We want to keep making it, but we have been told that it maybe too hard. I would plan on this being the last, if you want a pair.

UHR about to hit the top of people's lists! Myself included. Especially for next year's Indigo Invitational

[Ross]

plugin-calendar-event-wrapper:start |||IH-634S-UHR Restock|||

IH-634S-UHR Restock

[[moment:time-date-view, utc, 1775574000000, 1775574300000, false]] UTC
See time in your time zone

IH-634S-UHR Restock

[[calendar:response_no]] [[calendar:response_maybe]] [[calendar:response_yes]]

[[calendar:response_yes]] 8

[[calendar:response_maybe]] 2

[[calendar:response_no]] 0

plugin-calendar-event-wrapper:end

[Kasi]

Am game for a pair.

[Duffputter]

Are all the cuts getting restocked in UHR? I don’t want to miss out on getting a pair if it’s the final run but was hoping for the 666 restock.

[AdamJ]

@Duffputter yes, but the 634 and 888 are first. The 555, 666 and 777 will follow at some point in the coming weeks/months

[Oaktavia]

Perfect timing

[Nittpics]

@Ross has the sizing chart been updated already to reflect the latest batch of 634 UHR measurements?

Thank you