Repairs & Modifications
-
Hi there,
The finish actually looks pretty good, doesn't look like anything to worry about, if it was me I would take a lighter to those end loops to just seal it off, like we do here at IHUK
Some extra words of wisdom from @Ross below
We used a poly-cotton thread this half burns - half melts these ends off sealing the ends better than a tie-off or what it looks like they done here and tucked the ends back in (?, honestly its a little hard to tell from just pictures).
I'd be tempted to do the same here, take a match or lighter (carefully!) to those loose ends to just burn them off so they don't catch on anything - other than that the the stitching itself look solid -
@hello_4lex Post/question moved here.
-
-
@Jack appreciate the insider info Jack. My local shop uses 100% cotton thread, I assume this leaves the burn method out of the question?
As for finishing, I believe they just do the old school overlap (roughly 1.5-2” of stitch overlap) and snip the ends.
-
@hello_4lex No worries, just wanted to keep posts of similar nature together. It’s all a learning curve.
-
@Jack haha fair enough. My only concern would be that due to the cotton thread, rather can creating a sort of end “seal” it might just cause the thread to be more easily pulled out with friction and wear. I’m quite the nit-picker, so I just have to not look at the inside of the hem until I forget about it.
Fingers crossed that they hold— would hate to start getting some nice roping fades only to have to re-hem and then create some weird overlapping patterns in the denim.
-
@endo wow that's a great modification. Is that wool lined with quilted arms? you must have a trusted and skilled tailor.
-
@jordanscollected said in Repairs & Modifications:
Is that wool lined with quilted arms? you must have a trusted and skilled tailor.
yes, and yes she's great
-
@ShopatIronHeart I submitted a repair form for a small repair and hem, how long should I expect to wait before being given instructions to send the jeans in?
-
This post is deleted!
-
@m4xime the shipping labels for sending in repairs are manually generated during office hours. That ties in with @Mister_Brue’s comment. I had some direct correspondence about my current repair before sending it in, but I guess your form will need to be reviewed to confirm that the repair is possible before they send you the shipping info.
-
-
Thanks all! This prompted me to check my spam and it was in there! All sorted. Addressing a small issue where the fabric is softening before it gets worse.
-
First attempt at sashiko repair. Kakinohana (persimmon flower) stitch on my N&F 10th Anniversary pair.
Did not take into account just how effeminate it would end up looking when finished, but I still dig it
