Biltbuck Lot 444 by Attraction
-
@Daniel-San thanks for the honest feedback - greatly appreciated.
-
@mecken88
I can’t compare with the Wescos, sorry !
The 444 look pretty sleek but have good overall volume for the feet. Getting in and out is struggle free, at least for me.
The only thing is the break in
which is quite challenging for most guys. The leather is outstanding ,but thick and stiff, so it needs a little to get comfortable.
I would recommend the same size as your Iron Rangers . -
I am in the market for some 444 and everybody tells me same size as IR is recommended @John-Galt
-
-
@Daniel-San gorgeous boots - very tempting.
-
@John-Galt
after the first hours in , I can say that these run a little smaller than the other ones I have. They are overall a little tighter, so if you are in between two sizes you might think of sizing up.
But of course this could be different with every single pair as they are handmade and little tolerances are usual as we all know.For me these are the best fitting ones so far , yes they are pretty tight fitting but the result is absolutely zero heel slip. As always I start with the thinnest socks I have and slowly use thicker ones during the break in progress.
to be more precise, I don’t wear socks in my engineers anymore. I changed to knee high socks or are they called stockings
?
Much more comfortable way to wear engineers from my experience. -
@Daniel-San thank you much for the feedback and advice - they look great
-
@John-Galt
they are absolutely awesome and they will get a wonderful patina with time and wear.
But I need to find a matching leather jacket now as I only have black ones
-
@Daniel-San those are absolutely beautiful man. Let us know what jacket you find to match
-
@Daniel-San
the rabbit hole gets deeper. Looking forward to seeing the jacket you go with. -
-
@Daniel-San these look interesting! Hope you show us some more pictures:-)
-
@FlavourFade
of course
-
now here they are
super special and impressive !
thought they would line the shaft because of the studs but they didn’t
. They did it at the heel , guess otherwise it could end up painful.
was a little afraid about the studs in the shaft might scratch my shinbone but no problem at all. Worn them in the house for an hour and it worked fine.
so here a few first pics
-
Need to hem your Jeans to the top of the boot length to show the studs
-
@Daniel-San spectacular!
-
@Daniel-San amazing my friend, simply fabulous
️️️ -
@Daniel-San what a boot!! Don't know if I would wear them but they sure are statement pieces
-
-
@Daniel-San maybe try some punkrock style skinny jeans or even leggings with the boots??
super rare and limited
