IH-666-XHS - 25oz Selvedge Denim Slim Straight Cut Jeans - Indigo

[Alex]

@Galena418 Should be very soon

[mecken88]

@IronFart I think it looks cool! I like some stacks for sure. May I ask what size you wear in the pictures?

I’m really intrigued of buying a pair of 666 25oz for myself some day, just been thinking depending on size how they look with engineer boots. Don’t want them too wide or narrow. Trying to figure out the sweet spot

[Ross]

plugin-calendar-event-wrapper:start |||IH-666-XHS Restock|||

IH-666-XHS Restock

[[moment:time-date-view, utc, 1746198000000, 1746198300000, false]] UTC
See time in your time zone

IH-666-XHS Restock

[[calendar:response_no]] [[calendar:response_maybe]] [[calendar:response_yes]]

[[calendar:response_yes]] 2

[[calendar:response_maybe]] 0

[[calendar:response_no]] 0

plugin-calendar-event-wrapper:end

[CosmoSix5]

@mecken88 it's tricky due to the leg opening varying by waist size. My 555's look great over engineers but they're 38. My friend wears 32 and can't get them over his. Imo 8" is the minimum opening for engineers. 7"

[Alex]

@CosmoSix5 said in IH-666-XHS - 25oz Selvedge Denim Slim Straight Cut Jeans - Indigo:

My 555's look great over engineers but they're 38.

This sort of has nothing to do with how they look with 666s, though...

[Alex]

@mecken88 said in IH-666-XHS - 25oz Selvedge Denim Slim Straight Cut Jeans - Indigo:

how they look with engineer boots

The 666 works well with engineer boots, that was part of its design

[CosmoSix5]

@Alex the point I failed to make. That 555 is slightly narrower at the bottom and still looks good imo

[Luijim78]

@mecken88 I wear a size 28 and wear engineer boots with every cut, from the least suitable 777 and 555 to the easier 666 and 634, the Mr Lou in particular have a very thin shaft and are easy to slide through, I have some difficulty with the rough-out leathers which create much more friction and are not easy to slide.

[mecken88]

@CosmoSix5 i would be a size 34 in these. With a leg opening of 8,4” I think that should not be any problems with engineer boots.

[Shaun]

Sizing chart can now be found in the first post here
Please be aware you may not be able to view the product’s website page leading up to launch, as it will be briefly offline whilst we prepare for the release at 1600 BST on Friday 2nd May

[bluemantra]

I'm liking these measurements compared to previous drop.

[Nick]

[John Galt]

@Ross the tag size 29 totally sold out in less than an hour? I wasn’t available for the release and checked about 15 mins later and it looked like the size 28 & 29 weren’t released yet - not showing sold out, but also not showing available. Checked again about 30 mins later and size 29 sold out. Is this accurate? Wanted to pick up a pair and seldom does this size sell out so quickly.

[northsouthdenimguy]

For me these are perfect for engineers.

[Alex]

@John-Galt the last 29 sold before the restock, suggesting we had enough stock of the 29s when we placed the order that we did not order more as part of the restock

[John Galt]

@Alex I’m assuming another year or more till the next restock and it appears IH Japan is also sold out of tag size 29?

[Alex]

@John-Galt yeah, thats likely the case, flip side of that would be that the last pair will have been there for a year or so too..

Japan did not restock on this run, so no 29s showing on the stocklist to order, sorry

[John Galt]

@Alex yeah - I had inquired of the team a while back regarding the exact overall dimensions of that pair and they wouldn’t work for me due to at least one of the dimensions, so was hoping to get a pair to work from the restock. Fingers crossed that the next restock includes at least a couple pair of tag size 29 and that one of them works out. In the meantime, patience is supposedly bliss - but I tend to disagree. Thanks for responding. John

[ssherman95]

How much will the waist shrink on the pre-wear soak?

[yannis]

@ssherman95. 1 inch max typically about 0.5 of an inch