Repairs & Modifications
-
We have all the machines we need here, but we just don't have the time to offer repairs as a proper professional service….And, if we can't do it properly, promptly and efficiently, then all it can do, by offering a less than amazing service is hurt us....So we play, do repairs for friends and ourselves and leave it at that......
Sad, but true...
-
Pity, I have a pair of overdyed 666s I've not worn in two years because they need repaired. 1st repair was by the denim doctor, (who did what I didn't want him to do and no better than local places, would not use him again). Keeping them for when I can eventually take them to Self Edge for some darning type repairs.
Sent from my iPhone using Tapatalk
-
Hi,
I'm after some advice…
I regularly wear through the left knee of all my jeans well before the right knee and well before anything else serious needs repairing. I usually send my jeans to the Denim Doc in Manchester (UK) who does a great job reinforcing the knee and then over-stitching. This works pretty well for most jeans, however my current jeans (Trophy 1607) are super-soft and the reinforcing material changes the way the jeans hang at the knee; it looks like I've got kneepads underneath!
I've unpicked the stitching and am thinking I might ask him to re-do the repair with a lot thinner reinforcing material. Before I do, can anyone suggest any other way to repair small holes in the knee and where could I get it done?Cheers,
Dan -
I just sent my slim cut to railcar for some tapering. should have them back in a few weeks. I already did the hot soak and they are much softer than i anticipated. they certainly are hefty. i look forward to wearing them this fall. the Connecticut summer is no place for 25oz.. at least not the way i sweat. that 10th anni pronto though…
-
Does anyone know someone(possibly in the USA) who alters vests? I would be looking to get the shoulders chopped in a little and around armpit. I have a photo to show what I mean of a random vest photo I could get. Red line would be an idea of what I want.
Thanks
-
Thanks. I figured asking self edge, railcar, indigo proof…to start.
-
@matty123 curious to know your experience with railcar for tapering . I am considering same for pronto slim but don't anyone that can do the job as good as original ironheart.
Sent from my iPhone using Tapatalk
-
@matty123 curious to know your experience with railcar for tapering . I am considering same for pronto slim but don't anyone that can do the job as good as original ironheart.
Sent from my iPhone using Tapatalk
Railcar does an excellent job. You cannot see a difference. I've used them multiple times for tapering, and for hemming.
-
I thought railcar weren't taking any denim over 21oz to work on these days? That changed?
-
On their webpage they don't offer hem service for anything over 21oz, but tapering page says 25oz.
My PIH5DCT were hemmed by IHUK at time of purchase. -
Railcar does a great job with the tapering service. Or any service for that matter. Their darning service is second to none. I emailed them ahead of time and asked specifically if they will Work on 25oz denim. they told me yes. one of their railroad car brand jeans that they make and sell is 23oz. Just email info@railcarfinegoods.com if you have any questions. They respond quickly.
-
@matty123 since you have experience with tappering order . Quick question , I wanted to shorten the hem cuff little which is an option. Don't want legs or thigh shorten. What else I need to provide measurement for tapperingn ? Knee measurement ? Or if I provide cuff length they will tapper accordingly ?
Sent from my iPhone using Tapatalk
-
I've had RCFG taper jeans for me, including 634-XHS and Samurai 25oz. Their crew does an excellent job. Keep in mind their turn-around time for tapering is longer than for hemming.
When you are on their order page, there are several options that you need to address. This covers how much you want them to taper, where you want the taper to start, overall length, hem width, etc.
My only criticism is they only have limited thread thicknesses and colors, and their machine is calibrated to their production standards and can't change the stitch spacing. This means the inside seam stitching will not match the original. They do take out the entire seam to the crotch, so there is no mis-matched threads on the seam.
-
just sent my 14oz IH's to Railcar last week for hemming and tapering, first time I"ve used them. I'll provide some feedback on here when I get them back.
-
@matty123 since you have experience with tappering order . Quick question , I wanted to shorten the hem cuff little which is an option. Don't want legs or thigh shorten. What else I need to provide measurement for tapperingn ? Knee measurement ? Or if I provide cuff length they will tapper accordingly ?
Sent from my iPhone using Tapatalk
When you order tapering on their website you have options to choose. They ask For a thigh measurement @ 2" below the crotch, a knee measurement that you want at 13" below the crotch and they ask for a hem measurement. You provide the measurements that you desire. You do not have to change anything that you don't want changed.
-
@matty123 thanks
Sent from my iPhone using Tapatalk
