IH-888S-21od - 21oz Selvedge Denim Medium/High Rise Tapered Cut Jeans - OD'd
-
@Ross said in IH-888S-21od - 21oz Selvedge Denim Medium/High Rise Tapered Cut Jeans - OD'd:
Iron Heart Germany will also restock this
[event-invalid][name]IH-888S-21od Restock[/name][allday]false[/allday][startDate]1789484400000[/startDate][endDate]1789484700000[/endDate][reminders][][/reminders][location][/location][description]IH-888S-21od Restock
[/description][mandatory]false[/mandatory][/event-invalid] -
Yay! Been waiting for this
-
oh yea! this will be my first foray into 888s. i normally wear 634 or 633.
-
As someone with bigger legs, I normally have a hard cut off for anything smaller than a 14” thigh on jeans, how bad could a 13.8” thigh really be?? (Talk me out of it)
-
@IWannaIndigoHome that is almost 0.5 of an inch difference in circumference and you will feel it. If I was you I would size up.
-
@IWannaIndigoHome Keep in mind the size chart of this run hasn't been posted yet, so you may be looking at the previous batches size chart...
-
@IWannaIndigoHome I am the same way and usually looking for a 14” thigh. I just got a pair of 1955s with a 13.8. I am thinking this will be the lowest I can go as I have noticed with my other pairs that started out with a 14” thigh that they have stretched and feel somewhat too baggy and now measure 14.25”. So I am hoping that 13.8 will be just about right to once they stretch, they will be perfect at 14”.
I know it is a different cut cut I should have them sometime this weekend if not Monday so hopefully I can update you if you want
-
-
@halfguard see here
-
I’m so excited for these. I’ve worn my 14oz broken twill over dyed for 3 years now. Cant beat 21oz
-
size 35 ordered!
-
Does anyone have any insight into the waist sizing on this new batch? I reached out to Franklin & Poe to confirm their sizing because their chart is a full 2 sizes off from the IH chart on a 32in. waist, and they said they pulled a few pairs and confirmed that their size 34 matches closest to 32" (whereas size 32 matches closest to 32" on IHUK). I thought it might be a difference in the way they measure, but the orientation of the pants alone wouldn't create a such a drastic difference in waist sizes, maybe .75" at most.
Any ideas on what might be happening here? I have store credit with F&P, which is why I'm not just ordering from IHUK directly.Well worn denim & leather is a journal of life.
-
@indigo_fades I’ve seen stuff like this before. Just buy whatever size that works for you based on IHUKs measurements. They send all the stuff to F&P anyways. Selfedge is like this too.
-
@indigo_fades Find a retailer’s page for how they measure and compare it to IHUK. There may be a slight variation in how they are measured and is often the case.
@Choko is completely correct and I normally default to IHUK’s method and posted measurements.
-
Ordered my first pair of 888, missed having some OD and 21oz in the closet. Hope they fit, because I decided to get them hemmed right away
-
@FlavourFade sames. i opted for the largest W35 they had and they found a 35.2" (34.8" listed). my best fitting 634 21oz have a waist of 36" measured IHUK. i should be good to go with the higher rise and some stretch.
-
First couple of days in the new pants, they feel a lot more rigid, thick and heavy than I remember my pair of 777s-21od I had a couple years ago. But I can already tell they are softening up by the minute and I will wear them as much as possible in rotation with my other main project to get some nice evo out of them. It's my first time owning the 888 cut, I tried some pairs on but never got the sizing right until now. Very happy with these
