IH-1955S-142od - 14oz Selvedge Denim "1955" Vintage Tapered Jeans - Indigo Overdyed Black
-
Don't dilly dally around at launch. Place your order with notes re: your sizing preferences. The guys will come back to you when they process your order, if we can find nothing to suit, we will refund you. If these sell fast and you are prevaricating, you may miss out....
Also, be aware that having something in your cart does not guarantee it will still be there if there is a feeding frenzy. Stock is NOT decremented until your order is complete. So I would have your message about sizing ready to cut and paste into the comments field on the order page.
-
Looking for some guidance from you vets. Hoping to get these as my first pair of IH denim. I ordered a pair of 730 chinos off eBay in 35 and I can’t fasten them, though the waist measurement said 17”. I have a pair of Levi’s that measure 17” and some other 5 pocket pants that are 18”. What size should I try to grab in these? Thanks!
-
@stuffedcrust Please watch this video and measure your Levi’s and your chinos as seen: https://ironheart.co.uk/pages/how-we-measure-bottoms
Once you have those measurements, compare them to the measurements chart at the beginning of this thread to pick a tag size that measure jeans that do fit you.
-
OK now I'm having some serious doubts, I was pretty sure a size 34 would be good for me based on the measurements and the size 35 888-SBG I got over the summer, that has a similar waist measurement, and a size 34 1955S-142 that I tried on last summer but to my eternal regret didn't buy. But Rudi's several inches thinner in the waist than I am--is there any way to know how much work that belt is doing in these pictures? And I wish jeans fit me like this but am I crazy to think these appear to be riding a little low on the hips relative to how high a rise the 1955 has?
Just wondering 'cause looking over the measurement chart I think a 35 would be too baggy everywhere else, sigh.
-
@twinning Rudi should be wearing a 32 at most. 34 is crazy. I think the sizing confusion for this pair might make me skip it at this point. Ha
-
@twinning @harleylawhorn i agree, the model has been missized in these jeans based on the photos above. Sorry about that.
If you have unanswered confusion with sizing, what is it? We can try and work it out now.
-
@Alex thanks for clearing that up. That definitely added to my original confusion on how to size these being that they are high wasted. Would you say that I could get away with a 31.9 (size 32) if I currently have a well fitting 634s that’s sized 32.5 since these have a higher rise?
-
Yep, on reflection he probably could have gone down a size to a 33 in these and we should've hoisted the waist up a little higher to really emphasise the rise on them. @twinning I would trust your measurements over being swayed by the dims of the model. I appreciate the images above are muddying the waters somewhat so apologies for that. We'll reshoot in the coming weeks on a model who is better suited to the 1955.
As Alex mentioned above, happy to help with specific sizing queries now in the short term to help you find a pair!
-
@harleylawhorn said in IH-1955S-142od - 14oz Selvedge Denim "1955" Vintage Tapered Jeans - Indigo Overdyed Black:
Would you say that I could get away with a 31.9 (size 32) if I currently have a well fitting 634s that’s sized 32.5 since these have a higher rise?
Assuming that your 634 measure 32.5 the way we measure, now, after wear and not immediatley after a wash, then your safe tolerance for another pair of similar fitting jeans (based on waist alone, clearly - i cannot assess how the leg would fit from the info provided) would be 31.5-32.0. This would allow them to stretch to about the same size.
If you are saying that you have a pair of 634S that measured 32.5 at the time of purchase, then the math is slightly different.
In my experience, the average customer has a slightly narrower "waist" at the point that the 1955 is designed to sit than the 634, which would support you fitting on the smaller end of the bracket i gave - so yes, I would predict that size would work for you.
-
Also, @harleylawhorn you have quite a few posts, so I assume you've shopped with us a few times before, but in case you were not aware, you can purchase a tag size 32 and ask for the crew to ship you the pair with an actual waist closest to xxx" as possible if you have a target you are trying to hit.
-
@Alex that’s awesome Alex. Thank you. But going off of what you just said, anywhere around 32 would probably be money.
-
@Alex Oh it's all good, I guess the question is to what purpose the lookbook-style shots. These look amazing, and seriously he's rockin' the look. But as far as getting a sense of the fit on a particular body I was just kinda scratching my head lol.
As far as unanswered questions, no I don't think so. Based on measurements of the jeans I own, the jeans I've tried on in the past, and so forth, I'm confident size 34 works for me, though might add a note to see if any pairs happen to be larger than the norm in the waist.
In all honesty, I expect these to sell out immediately at launch tomorrow, so I have about 24 hours to decide if I'm going to try to get a pair or not--I definitely want the 1955 in indigo but if I don't manage to get a pair of the OD it won't be the end of the world.
Thanks for the help!
-
Perfect. Happy to help @harleylawhorn @twinning
-
@Alex just re read your first post and read it a little wrong the first time. The original measurement of the 634’s were 32.5. Now they stretched to a 33”. So I’m still assuming that if I get a 31.9, they’ll stretch to at least a 32.5, but would be fine because the waist fit opposed to the hip fit
-
What would be the best approach for tomorrow’s release?
I am in between sizes and am looking for the following.
Waist: 35.5
Thigh: 13.8-14Should I go for a size 35 and ask for an outlier to the larger side in thigh measurement or go 36 and ask for an outlier to the smaller side in waist measurement?
I do like the slightly smaller top block with the shorter rise of the 35 but the majority of the time the limiting factor is my thighs.
I am trying to prevent the extra material in the top block to fit my thigh and waist measurement. Not wanting the diaper look lol.



