IH-888-XHSib - 25oz Selvedge Denim Medium/High Rise Tapered Cut Jeans - Ind/blk
-
@Oaktavia Looks great! I’m wearing mine right now but only initial soak so far. Would you soapy soak these before moving to machine wash? And spin cycle or no? Not sure how prone these might be to marbling.
-
@natefreezy I always soak to lessen the likelihood of marbling just to be safe. It's easy.
Edit: I reread your question. To finish answering and to clarify, I also machine wash after a soak. No spin cycle.
-
@Oaktavia Thanks! Makes sense. I was also wondering whether the first wash with these should be soapy soak or can go straight to washing machine (with aforementioned pre soaking). Maybe it doesn’t matter but was curious since you went that route.
-
@natefreezy do you mean first soak and wash before wearing them? No need for soap. If it's the first wash after wearing them and they are dirty, definitely use soap.
-
@Oaktavia Hey no not initial soak before wearing (I did that already), but first wash after wearing which I’m coming up to. Was trying to figure out whether to soapy soak in tub or use washing machine. You did former then the latter so was just curious!
-
@natefreezy OK I understand now. To prevent marbling, I soak in a tub of just warm water for one hour. Then I wash in my machine normal cotton cycle with no spin. I turn the jeans inside out. After the wash, I learned recently to lay out a couple large towels on the floor and lay the soaking pants on top of them (with no spin, the pants will be dripping soggy wet). Then put two more large towels on top of the pants. Next, roll the towels and jeans up and kneel on them as I roll them up. This removes a lot of water that makes it less messy to walk the jeans outside to dry and takes much less time to dry. I think that covers it all...
IG: electricindigowizard
"Possibly splitting hairs, but I consider @Oaktavia to be the beardy, dank High Magus of this denim game…" @neph93
WTB: IH-526V-XHS - XL/XXL
IHJ-32 - XL/XXL -
Worked like a charm
-
@Oaktavia these are looking great man. I’m really interested in how they compare to your 21ib, think you could do a couple side-by-side shots when you get a chance?
-
@WhiskeySandwich heck yeah dude I can do some side by sides later today. The 21oz have less wear than the 25oz but still worth taking photos.
Edit: see here
-
@Oaktavia said in IH-888-XHSib - 25oz Selvedge Denim Medium/High Rise Tapered Cut Jeans - Ind/blk:
@natefreezy OK I understand now. To prevent marbling, I soak in a tub of just warm water for one hour. Then I wash in my machine normal cotton cycle with no spin. I turn the jeans inside out. After the wash, I learned recently to lay out a couple large towels on the floor and lay the soaking pants on top of them (with no spin, the pants will be dripping soggy wet). Then put two more large towels on top of the pants. Next, roll the towels and jeans up and kneel on them as I roll them up. This removes a lot of water that makes it less messy to walk the jeans outside to dry and takes much less time to dry. I think that covers it all...
I've been doing the same with all my selvage denim. The crew at Self Edge PDX tipped me off to this move before I had a pair of Brave Stars repaired. It's my go-to for all of my selvage jeans, shirts, and anything I don't want marbling.
The pro move is to find an old beach towel. They tend to be heavier-weight, hold more water, and are properly long for those unhemmed jeans.
-
-
@Yoprst You are in for a treat, 25oz should be right around the corner. But yeah I believe 19/21oz no plans.
-
@Yoprst I saw a comment on Insta from IH saying it should be here before end of year. I know I’m dead keen, for this exact combo of weight, colour and cut
-
@Yoprst The guys are correct, the 888-XHSib should be by end of the year and there is nothing in schedule for the 21ib yet I'm afraid.
Nothing for the 19ib either, and If my memory service me this was a seasonal/one off piece, so nothing in the works for this I'm afraid. We do have the 19L and 19Lod being organised into to production in Japan. so realistically we wont see that for at least 6-8months, if you are wanting something in that 19oz fabric.
-
@JoshC said in IH-888-XHSib - 25oz Selvedge Denim Medium/High Rise Tapered Cut Jeans - Ind/blk:
@Yoprst The guys are correct, the 888-XHSib should be by end of the year and there is nothing in schedule for the 21ib yet I'm afraid.
Nothing for the 19ib either, and If my memory service me this was a seasonal/one off piece, so nothing in the works for this I'm afraid. We do have the 19L and 19Lod being organised into to production in Japan. so realistically we wont see that for at least 6-8months, if you are wanting something in that 19oz fabric.
Jeans in 19lod ? as in 19 oz over dyed ?
-
@JoshC oh dang, my indigo invitational entry went out the window. I totally respects its stuff out of your control.
Just had such high hopes for them to arrive in time before it was too late to send in the raw proof.
Last date is 31 October, but guess it would need a miracle for that to happen🫣
Oh well, I’m buying a pair of XHSib eitherway and gonna wear the hell out of them
Looking forward to them! Hype is unreal
-
Right around the corner, you say? Much excite!
I'm totally buying a pair to put on the shelf until I can get through my current 888 XHB pair. And this is where this lovely affliction has come to, shelving denim due to limited production and in anticipation of future wear. I'm here for it.
