IHJ-123-OD - 14oz Broken Twill Selvedge Denim Work Jacket - Indigo Overdyed Black
-
Thanks 🫡
-
@JoshC that would be great. Much appreciated.
-
@JoshC How well does the adjustable snap fastened cuffs help when the sleeves are quite long for you?
-
@samo this is me with a 4XL alot more comfy especially when layering, so if you are wanting to wear a hoodie or heavier garments then tee's than go with the 4XL and if your planning on wearing it with just a tee as a nice summer jacket then go with your usual sizing which for me was the 3XL as you can see in the previous photos.
@Northman definitely helps with my short arms haha, I have used the tighter snap opening on the 4XL and I think you can see it look better than the wider opening on the 3XL
-
@JoshC thanks for all the input with sizing. I have read somewhere that this 14oz denim is more breathable than the "standard" 14oz, am I correct?
-
Thanks @JoshC!
-
Do we know if this is the old OD method or the new one?
WTB IHJ-140-IG size L
-
-
@bluemantra Looking back, I can see that the old one was Sulphur OD, the same as this one.
-
So are people generally going with their UHF size on these? I'm struggling to figure this one out. I'm a medium in winter jackets like the n1 and m65 and a large western shirts. I can go either large or medium in the work shirts. I'm thinking large here, but toying with xl because the waist and opening are pretty narrow. Any advice?
-
I am going with my UHF size but only plan on wearing a t-shirt underneath.
Would go a size up if wanted anything thicker underneath.
-
@samo @JoshC gave you pretty good help visually and his personal experience. I think you could measure your best fitting jacket and use that as a guide. If you use a shirt, then pick measurements slightly bigger than your best fitting shirt.
You also have to account for how you’re going to wear it. Layered or just over a t-shirt. Josh mentioned that over a t and he would go xxx, and layered xxxx
