IHJ-123-OD - 14oz Broken Twill Selvedge Denim Work Jacket - Indigo Overdyed Black

[H-P-U]

@Tom-Longarms GREAT !!!!! Thanks Tom !!!!

[samo]

@JoshC said in IHJ-123-OD - 14oz Broken Twill Selvedge Denim Work Jacket - Indigo Overdyed Black:

@catdad1 @THEOVERFIEND I have attached some photos but this is the 3XL on me, and I'm just wearing a Tee underneath, tad snug, fitted when I do it up but fits lovely, if I wanted to layer it with anything other than a Tee I would go for the 4XL

If you do have any questions or queries dont hesitate to nudge me and I will be here to help.

How are you sizing this compared to an N-1? If I’m a medium in the n-1 would I go with that same size? I’m not sure how the measurement translate between the two since the n-1 is much more bulky.

[JoshC]

@samo In my IHM-35-KHA I wear a 2XL, and it fits well with a bit of layering (like a UHF). The N1 jackets tend to run larger than most of our pieces, so I can still layer a little in that size.

For the IHJ-123-OD, I went with my usual shirt size of 3XL. If I’m just wearing a tee, that work fine and looks smart and still fitted open, but I’ll bring a hoodie with me tomorrow to double-check the fit and I’ll also send over a photo of the 4XL so you can see how it looks with a bit more room etc.

[fadesandkicks]

Thanks 🫡

[samo]

@JoshC that would be great. Much appreciated.

[Northman]

@JoshC How well does the adjustable snap fastened cuffs help when the sleeves are quite long for you?

[JoshC]

@samo this is me with a 4XL alot more comfy especially when layering, so if you are wanting to wear a hoodie or heavier garments then tee's than go with the 4XL and if your planning on wearing it with just a tee as a nice summer jacket then go with your usual sizing which for me was the 3XL as you can see in the previous photos.

@Northman definitely helps with my short arms haha, I have used the tighter snap opening on the 4XL and I think you can see it look better than the wider opening on the 3XL

[FlavourFade]

@JoshC thanks for all the input with sizing. I have read somewhere that this 14oz denim is more breathable than the "standard" 14oz, am I correct?

[samo]

Thanks @JoshC!

[bucky]

I am so glad this one is coming back. I have outgrown mine in medium from the last drop. woo!

[bluemantra]

Do we know if this is the old OD method or the new one?

[goosehd]

@ShopatIronHeart

[JamesB]

@bluemantra Looking back, I can see that the old one was Sulphur OD, the same as this one.

[samo]

So are people generally going with their UHF size on these? I'm struggling to figure this one out. I'm a medium in winter jackets like the n1 and m65 and a large western shirts. I can go either large or medium in the work shirts. I'm thinking large here, but toying with xl because the waist and opening are pretty narrow. Any advice?

[1WayTrip]

@samo

I am going with my UHF size but only plan on wearing a t-shirt underneath.

Would go a size up if wanted anything thicker underneath.

[goosehd]

@samo @JoshC gave you pretty good help visually and his personal experience. I think you could measure your best fitting jacket and use that as a guide. If you use a shirt, then pick measurements slightly bigger than your best fitting shirt.

You also have to account for how you’re going to wear it. Layered or just over a t-shirt. Josh mentioned that over a t and he would go xxx, and layered xxxx

[Denman John]

Cross post from last weekend … my favourite jacket!

[AdamJ]

Sam B is wearing X-Large

Vik wears an XS
Shaun wear a Medium
AJ, Bailey and Sam D wear a Large
Adam, Steve, Ben and Jack wear an XL
Ross wear a XXXXL

You can view the crew's vitals here

[Nick]

[hackubu88]

Will this one be stocked at Rivet and Hide this time around?