IH-555S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim Super Slim Cut Jeans

[Mizmazzle]

@indigo_nico 888 is an incredible cut. They are super comfy. You will never have to worry about plumbers ass, and they keep a slim leg profile due to the taper. The key it to size the waist as small as possible so that you keep a slim leg profile...then that added thigh width gives the leg some room to breath...

Funnily enough, I have 3-4 pairs of 888s....I have one pair of 555's....I want my UHRs to be 555 because I have pretty skinny legs...I kind of think the 888 and 555 will give a similar silhouette depending on the body type of the person wearing them...since you have thicker thighs you can get the similar look in the 888 (if sized properly) that I would in the 555. Just a little theory of mine...

[chillmonroe]

Just scored a pair of these today. I have no experience with raw denim but Ross and Josh were super helpful walking me through sizing and stuff. I’ve also never worn the 555 cut, coming over from 666. Got em hemmed cause as Ross said, gotta soak and wash em anyway and at that point returns are no go. Stoked to see how they are

[Ross]

@chillmonroe you're very welcome, let us know how you get on!

[Daniel San]

fantastic UHR fades with Clinch engineers .

[Twistlock]

Wow @Daniel-San , those look like they've been sandblasted.

[Supersonic]

@Daniel-San sick

[Davids_denim]

@Daniel-San awesome

[jrb1975]

Just got a pair of these and I literally can't button them up even when I try without them on. Does anyone have any ideas. I have two pairs of xhs selvedge and two jackets and a and have never had this issue.

[goosehd]

@jrb1975 Sharpie, needle nose pliers, wooden dowel, a drum stick, etc. to stretch the hole. Old hacks that work for many of us.

[Jord]

Every time I buy something 20oz+ I have the "oh shit realisation" just before they arrive that I need to button them... Goose gave some good tips, I use a sharpie and a pair of pliers

[jrb1975]

@goosehd thank you ,wow those button holes are something else but i got them and these are unbelievable raw denium jeans. These raws are like nothing ive ever seen before so different from the sbg's and the couple pairs of extra heavy raws ive got. Also the denium i believe must be incredibly difficult to produce these are true armor and stiff and I could use them to sand my deck as well

[dirtyframer]

What would ya'll recommend hemming these to account for potential shrinkage? I normally get my jeans hemmed to a 32, was thinking 33.5/34 on these?

[indigo_nico]

@dirtyframer my UHR shrank a fair amount in the inseam - from 36.5" to 34.75" in a 634. not sure how different it would be in a 555 though. this was following the initial soak/wash instructions before wearing.

[dirtyframer]

@indigo_nico looks like if I gambled at 2" longer than normal I would be safe

[Salted Racer]

Is there a restock of these on the horizon ?

[AdamJ]

@Salted-Racer Due April/May

[Salted Racer]

Thank you