IH-634S-19L - 19oz Left Hand Twill Selvedge Denim Straight Cut Jeans
-
@popvulture said in IH-634S-19L - 19oz Left Hand Twill Selvedge Denim Straight Cut Jeans:
@Alex I'm curious if anybody else noted this
I haven't heard this before mate, no. Maybe they shrank more than anticipated in the rise when we started washing them and the pattern was never adjusted.. I'll check it out on the next run
-
I love the lefty fabric, but it's one reason ive never ever considered them in this cut or my usual 666's. The sizing chart on both show them with relatively lower front and rear rises compared to all of their other fabrics like 18, 21, xhs, etc. Then combine that with some potential for shrinkage on the lefty fabric if it's anything like the lefty jacket i have.
Here's a quick comparison between 666/634 of the lefty vs their 21 brethern.
That half inch loss of rear rise in the 34 in particular kills them for me. I know @popvulture you're a similar'ish waist size to me so maybe this is what you've noticed.
-
@pechelman yep, that’s what I’ve noticed as well. It took me a long time to figure out that it’s the back rise that’s probably the biggest factor for me in terms of a good fit in the top block. It’s also crazy to think that just a half inch can indeed cause such a difference, but as far as I can tell, it’s true. If I have a pair of 34s with a 15” RR, it’s gonna have that riding-up effect. Now I aim for at least 15.5, ideally more like 16. My sz 34 634XHS that have been my daily drivers for the past 6 months clock in a tad below 16 and they’re perfect.
-
@Alex The 19L 777’s also seem to have a lower rise than the other fabrics. Love mine anyway but it wouldn’t have been a problem with a slightly higher rise.
-
Any ideas on when there will be another run of these? I thought maybe soon since the fabric came out for the jackets. Thanks!
-
@paulmtg said in IH-634S-19L - 19oz Left Hand Twill Selvedge Denim Straight Cut Jeans:
Any ideas on when there will be another run of these?
They are in production, but so early that we have no ETD
I thought maybe soon since the fabric came out for the jackets. Thanks!
That's not really how it works, but good thought.
-
What would have @Filthy2123ozjunkie thought about this/his forum in one way or another today?
Hopefully he still smiles with us about..