WESCO-MRLOU-BLK - Wesco® - 10" Horsehide Pull-On "Mister Lou" Engineer Boot - Black
-
@FlavourFade I have both. The Lofgren in 10, Lou‘s in 9.5. the Lofgren has more room than the Lou. I would say they are quite similar in terms of sizing.
-
Thanks a lot! @Dmart
-
-
@pechelman shouldn't be anything to worry about in my opinion. just a sign that the hides are shifting a little as they're breaking in, those seams are triple stitched and the thread is tough AF! I'd be surprised if it shifts any more than that.
keep a weather eye on it though, if any of those stitches actually breaks then hit me up and we'll get them back to be repaired for you.
-
Thanks, @Ross. It's exactly what I was thinking as well; nbd.
Though I did buy these direct from Chris and would drive on down to see him if anything popped up, but figured with the large number of people here with these exact boots I might get a quick answer. Hope that's alright
-
Wonder if I could get some help on fit from folks with more experience than me. I just got these horsehide mister Lou boots in and not sure if I should size down a half size or not. They fit like a firm hand shake. Not to tight. I get a little slight heel slip on one foot. In the photos you can see where my toe comes to where my thumb is placed. I went with the same size as my red wing classic Chelsea 3190. Thanks.
-
Heel slip is a good thing and I'd be worried they are too small if you don't have any on the other boot. Don't worry about the toe so long as you have room. The instep is really the most important where the boot should fit snugly from just behind the widest part of your foot to just in front of the strap.
Do you have the insoles in right now?
-
@pechelman Same thing happened on my red wings. Left foot has no heel slip and right foot did, but went away with wear. Yes, the insoles are still in. I took them out in the foot with no heel slip and definitely felt roomier and snugness went away. I wouldn't say they are uncomfortably tight at the instep, but snug like a firm handshake. Just that little bit of heel slip in the right foot.
-
@bluemantra They sounds like they're probably about right, I little bit of heel slip is totally normal and to be expected and a bit of extra toe room is never a bad thing with engineers. As @pechelman says, getting that fit right in the main part of your foot is most important and a 'firm handshake' sounds good to me
-
Thank you gents! I'm going to keep these and hopefully they'll break-in nicely.
-
@bluemantra I recently had the same at first i thought they didn’t fit but after 2 weeks of wear they start to give a little and are getting better by the day
-
-
@bluemantra FWIW I thought my pair was too small for about 6 months before the leather started to stretch and become pliable. Now, the boots are nearly 2 years old and completely different than when they were new. It just takes time and wearing a lot. The heel slip is hardly noticeable now too, while before my foot was all over the place in the boots. Now, I don't think about how they fit because they are molded to my feet.
-
my Mr Lou size 9D have always been good from day one (even though I have a size 8/8.5D) probably the shape adapts to my foot, no slipping of the heel (which for example I found in the 7500 shape E) the only problem was the tip of the big toe on my right foot, (my grandmother always told me to cut my toenails a lot, especially at the corners and from what the beautician told me it was one of the billion mistakes I have done in my life), so I discovered that a very small callus had formed on the inside side on the nail bed and Mr Lou made me walk like rusty Robocop
for months ... then I solved the problem and now they are perfect like a glove even if after a couple of years they are still very rigid (characteristic of vegetable tanned leather) sooner or later they will break, for those who have chosen the Horween CXL version everything will be simpler and faster. Good evening dear friends, sorry if with my broken English I tried to tell the story of my life in a post -
rusty Robocop!
