Iron Heart Products - What do you think we should make?

[Alex]

@Karol I would give this a 5-10% likleyhood

[Alex]

@Karol and this probably >5%

[Alex]

@kkibbey23 could happen...

[Karol]

@Alex the 5%-10% is for the LHT in all cuts and the less than 5% is for the washed stretch 25oz denim right?

[Brian]

25oz double pocket apron with a loop to hang a pair of tongs while cooking
Has probably been mentioned before though

[Alex]

@Karol said in Iron Heart Products - What do you think we should make?:

@Alex the 5%-10% is for the LHT in all cuts and the less than 5% is for the washed stretch 25oz denim right?

I'm not sure that's the important part mate

[Karol]

@Alex as long as the figures are non zero there is some hope right?

[Chaintitch]

@sabergirl @Hematoma @Alex

Snaps on a Type III: can we make it happen??

[Alex]

Perhaps, but I am not sure that Haraki would be that into the idea. He tried snaps on a T3 vest but under the brand Ignition. If he had wanted to do it for IH, he would have already, I suspect

[goosehd]

@Alex ...also the 25oz Type III IH vest...

[sabergirl]

There was an IH Sherpa lined corduroy type III w/snaps once! My grail

[Matt]

@Karol I think @Alex would say “Never say never.” But it’s probably ok to think it.

[Alex]

@goosehd that was due to necessity, not a stylistic choice on his part. It was impossible to use the tack buttons

[Chaintitch]

@sabergirl said in Iron Heart Products - What do you think we should make?:

There was an IH Sherpa lined corduroy type III w/snaps once! My grail

Why can't we have nice things?

[goosehd]

@Matt I love reading between the lines....========================

[goosehd]

5%
________ = "Never say never"

10%

[Karol]

@Matt @goosehd the hope dies last
Actually can anyone explain what’s the issue with the 21oz LHT? It’s not like the other idea with 25oz stretchy washed denim. 21oz LHT exists already while the other would require development

[goosehd]

@Karol I know that @Alex and @Giles has referenced capacity issues in the past and am quoting one of G’s responses. There are excellent suggestions made all of the time, brought forth on items to be made or remade, but there is only so much that can be done with limited resources.

@Giles said in Samples - New Products We Are Working On:

During the lockdown in Japan virtually all foreign workers went home and were not allowed back in.  So mills and factories have been running at approx 60% capacity for a couple of years.

Japan is opening up again now, so things will get better.

How we fix this as a company was one of the major talking points when @alex and I were in Japan a couple of weeks ago.

One of the factories that makes a lot of of our stuff was remarkable.  They have built a lot of housing onsite for the foreign staff, they have individual kitchens in each apartment and a massive communal kitchen.  They also have a massive vegetable garden so produce can be grown on site. Alex and I were totally blown away with the care that the owner of the factory and his wife took of their "family"….

[Alex]

^pretty much

[Giles]

We are officially at full capacity in all our workshops.