The Boulevard of Broken Jeans - The Unit 2 Repair Thread
-
@JoshC Awesome thread and perfect timing. Mentioned last week that I have a pair of jeans (666-18) that are in need of repair.
I have blown out the cuffs:
…and the crotch may need repair/reinforcement:
The repair form asks for pictures of the areas that need repaired (are these ok, and if not what kind of pictures help you the most?), and what kind of information helps you the most.
Did I wait too long to have the cuffs repaired? Should I chop them and hem them or are the cuffs repairable? What should/can be done to keep these in rotation for a bit longer?
Appreciate any help/advice and look forward to you working your magic…just so you know, I had @Chesson fix a pair of my 666-XHS (Crotch repair/reinforcement) and he did an outstanding job. You’ve got big shoes to fill…
-
Hey @goosehd, Thanks for shooting those photos across. These are perfect. It's so I can see the area of damage to see what I am working with; these are also repairable.
For the cuffs: I would be more likely to recommend darn over the top of these as it will help to reinforce the area and help it stop from ripping further. It is possible to shorten these, but it depends on how much length you want to lose, as it will either have to be under the area of damage or above it. What we need to keep in mind is when we hem jeans, we need an inch extra to create a fold into the denim to put them through the union special to get them rehemmed.
Out of interest, when you wash your jeans, do you keep the folds/turn-ups in?
Crotch: easy little fix-up. There won't be a problem.
@Chesson is good, and it would be good to see him on the machine again in the future.
-
Out of interest, when you wash your jeans, do you keep the folds/turn-ups in?
I turn my jeans inside out, unroll the cuffs, and pre soak in a tub before I wash them in the machine. Cold water, low/no spin and air dry.
Great news about the crotch…it didn't look bad, but rather stay on top of it, then let it go too far.
How much length would you lose if you chopped them? Is it easier to shorten them (better repair), or darn them? Do you add a patch because it's a high wear area or just darn?
Sorry for all of the questions...
-
Thread is off to a great start. Stellar work - I kind of want to blow-out the crotch in my jeans now just to get them repaired…
A quick Q if I may, my trusty 888s-21s are just starting to fray along the inseam at the crotch, similar to that which can be seen in the below images but less frayed. Should I worry about it? I note you don't seem to have repaired the fraying so I suspect not...?
-
Hey @EdH, Thanks man! Haha, you say that now but you'll miss wearing them whilst they're getting repaired ;).
I remember for this pair, I didn't need to darn over them as the fraying looked bad, but the time I actually trimmed it all up after fixing the crotch, it was fine. However, this being said, if you put your finger underneath the fabric and between the inseam, if you can see your finger, I would say it's worth getting them fixed up. If you can't, then it should be fine.
Feel free to shoot some images on here
-
@JoshC Easy - I can x-post from the 888S-21 thread:
(Sorry for the mega-zoomed in crotch-shot.)
As you can see, it's just the fold of the inseam which is starting to fray. Nowhere near being able to see a finger, so I guess I can wait. I just didn't want it to become a thing.
-
Out of interest, when you wash your jeans, do you keep the folds/turn-ups in?
I turn my jeans inside out, unroll the cuffs, and pre soak in a tub before I wash them in the machine. Cold water, low/no spin and air dry.
Great news about the crotch…it didn't look bad, but rather stay on top of it, then let it go too far.
How much length would you lose if you chopped them? Is it easier to shorten them (better repair), or darn them? Do you add a patch because it's a high wear area or just darn?
Sorry for all of the questions...
@goosehd Perfect! always better to unroll them otherwise this can sometimes happen quicker with the water sitting in the crease/turn-ups.
Yeah with yours it's not a big hole but as they will be coming in it's well worth getting them done before it gets bigger!
It all depends on the length you need, but you will lose an inch from the cut line because of the 2 half-inch folds so if we cut them at 30" they will be 29" once they've gone through the hemming machine as long as the area isn't damaged.
I can do a patch underneath but what you will find is when you go to put your turn-ups in you may have a piece of a patch potentially on show.
-
@EdH:
@JoshC Easy - I can x-post from the 888S-21 thread:
(Sorry for the mega-zoomed in crotch-shot.)
As you can see, it's just the fold of the inseam which is starting to fray. Nowhere near being able to see a finger, so I guess I can wait. I just didn't want it to become a thing.
@EdH we love a bit of super zoom!it fine haha. This is fine keep an eye on it and once you can start to see your finger let me know and I will be here to help you
-
@JoshC - great thread, and what a fab name for it!
-
We recently received these well-worn battered pairs of IHXB01-Beatle Buster 21oz for the ReLove program. These bad boys will be the first two pairs of jeans on our denim bunting for the repair room. I think these look awesome. It's a shame they are unrepairable as they have ripped away from the seams on the crotch.
need to give your head a wobble son
