Ultra Heavy Raw (UHR), AKA 21/23oz Denim

[weftyarn]

Every cut is there for good reason, I guess.
888 being my favorite at the moment. High rise and a nice taper, without being stupidly aggressive.

Speaking of which: When will the 888 UHR arrive?

[AdamC]

@weftyarn 888 is my favourite also

888S-UHR's are currently making their way over from Japan, all things going well (no delays etc) they should be launched next week 

[weftyarn]

That’s great news, thanks Adam!

Looking forward to finally spend my photo competition prize

[neph93]

@the246guy:

I have a question in general related to the shrinkage and the correct sizing. I'm usually around 80 cm on the waist and Tag size 30 fits me perfectly fine in the 666 XHS where the waist comes in around 78-79 cm new and after stretch it kind of settles around 80 to 81 cm. The UHR in 666 cut, the measurement says for tag size 31 the waist is 82.x cm and given the shrinkage of 1 inch on the waist, that would mean the waist would be around 80 cm roughly. Correct? So for my needs, I should be looking at Tag size 31 for the 666. Am I right?

You can expect the UHR to end up around where it started after shrinkage and stretch. So a W31 starting at 82cm will end up about there. I’ve always gone normal size on UHR.

[the246guy]

@neph93:

@the246guy:

I have a question in general related to the shrinkage and the correct sizing. I'm usually around 80 cm on the waist and Tag size 30 fits me perfectly fine in the 666 XHS where the waist comes in around 78-79 cm new and after stretch it kind of settles around 80 to 81 cm. The UHR in 666 cut, the measurement says for tag size 31 the waist is 82.x cm and given the shrinkage of 1 inch on the waist, that would mean the waist would be around 80 cm roughly. Correct? So for my needs, I should be looking at Tag size 31 for the 666. Am I right?

You can expect the UHR to end up around where it started after shrinkage and stretch. So a W31 starting at 82cm will end up about there. I’ve always gone normal size on UHR.

Miss you @neph93 Your answer clears all that for me. So on the waist, I think I will stay with Tag size 30, but I don't know about the other measurements if they shrink will they come back? Those tension areas will definitely I suppose!

[neph93]

@the246guy:

I don't know about the other measurements if they shrink will they come back? Those tension areas will definitely I suppose!

Yeah… nowhere really gets the same amount of abuse as the waistband. That always stretches the most. But the thigh will stretch out again, possibly to the initial dimensions. As @sabergirl said, the rises, hem and inseam will not stretch.

[pechelman]

One minor clarification on the care instructions that say to drip dry after soak and before a machine wash. Is the drip dry necessary or can they go straight into the machine? Asking because there's slightly different guidance provided earlier in this thread quoted from Haraki via Giles saying to cold soak overnight before machine washing with no mention of an intermediate drip dry.

Thanks for bearing with me.

[Kasi]

Drip dry wait for them to dry then wash.

That what am doing. Right now

https://www.ironheart.co.uk/forum/index.php?topic=17864.new;topicseen#new

[Kasi]

@neph93
@Giles
Mine going in for. Wash tomorrow

Drip dry or tumble dry

Says on inside tumble dry warm

[neph93]

@Kasi:

@neph93
@Giles
Mine going in for. Wash tomorrow

Drip dry or tumble dry

Says on inside tumble dry warm

Ignore that mate. Unless you want the abrasion lines and marbling of course. I strongly recommend air drying.

[neph93]

@pechelman:

One minor clarification on the care instructions that say to drip dry after soak and before a machine wash. Is the drip dry necessary or can they go straight into the machine? Asking because there's slightly different guidance provided earlier in this thread quoted from Haraki via Giles saying to cold soak overnight before machine washing with no mention of an intermediate drip dry.

Thanks for bearing with me.

I put mine straight in the machine from the soak. Always worked out for me. Going in the machine wet also helps avoid marbling and abrasion lines.

[Kasi]

@neph93

Thanks

Mine have dry now, but that not problem I will soak them wet with the shower head
Before I wash them.

Avoid marbling

Just making sure about the tumble dry, won’t be doing it.

Thanks

[pechelman]

@neph93:

I put mine straight in the machine from the soak. Always worked out for me. Going in the machine wet also helps avoid marbling and abrasion lines.

Thanks, neph!

[Giles]

[Kasi]

Younger Giles is in the video.

Are sure it’s you.

Nice video.

[SKT]

Really enjoyed seeing this behind the scenes process. I don’t have a mind for engineering so seeing these machines do their thing is like magic to me. Humans can make some incredible things.

[vaquero357]

…I'm in! It's just too beautiful!

[Giles]

@Kasi:

Are sure it’s you.

[Kasi]

@Giles:

@Kasi:

Are sure it’s you.

️

[bizbuzz]

I know it's been mentioned that there's no current plan for 1955-UHR but since UHR is now in continuous production I'm still hoping one day y'all will make them again.  I'll just have to stick with the 888 for now.