IH-777-XHSBB - 25oz Selvedge Denim Super-Slim Tapered Cut Jeans - Black/Black
-
you're saying the new JBJ measurements cannot be compaired to the new IH measurements?
As Giles points out, measuring methods vary. In addition different denim will shrink and stretch differently. By measuring your pair, yourself, using the IH method we know exactly what a worn used pair that works for you should be. These are our «target measurements». By then using what we know about the way XHS behaves we can work out which size will have starting dims that get you close to your target measurements.
-
I keep looking at these and I am seriously tempted. These are comprised of 2 different elements I pestered Giles for for several years. I hope maybe there's still a pair when I go back to work, if I ever go back to work.
-
@Tuefar Thanks. I have not tried but if I were a cyclist I would probably choose a cut with a higher rise.
-
So uhm.. Another [stupid] question: how to determine one's inseam lenght. I figure to take a pair of denims with a good length, then cuff them the way I want - measure the difference and add it to the inseam (taking shrinkage into account). Do you gurus have a golden way, or does the above sound legit?
Also - if they're too loose, I see some people do hot soaks. Not owning a tub, would a 60 degree celcius/140 degree fahrenheit machine wash be ok to get some shrink going?
-
Just measure the length of a pair that fits you well in the length add one inch on for shrinkage (a bit more if you want to be ultra-safe). Voila, you have your length.
I would be super-wary about chucking them in a washer at 60. I think you will most likely end up with white streaks. I'd start at a gentle 40C wash, inside out, but make sure the jeans are soaking wet before you put them in the washing machine, and try not to spin or tumble dry.
-
Just measure the length of a pair that fits you well in the length add one inch on for shrinkage (a bit more if you want to be ultra-safe). Voila, you have your length.
I would be super-wary about chucking them in a washer at 60. I think you will most likely end up with white streaks. I'd start at a gentle 40C wash, inside out, but make sure the jeans are soaking wet before you put them in the washing machine, and try not to spin or tumble dry.
Thanks Giles! Issue is, I don't have a jean as long as the one I want (ie. none of my jeans af 'cuffable'
-
@alexswords
I have the 555’s too in XHSbb
Round 2 continued here’s
still no builder crack
size up again.
Round 3 coming watch this space
-
Those are looking real good Kasi.
No builder crack
-
Was going to give these a soak yesterday, good thing I didn't because I poured some caramel syrup down my leg today. Even got it in the cuff. Will a soak remove the sugary liquid our just give them a wash?
-
Carmel in the Cuff–--thats a new one
-
I went with a combo of the ideas, kind of spot wash after about 30 minute soak.
-
These are my second pair of XHS. They seem to be slightly lighter in weight and thinner than 777-XHS. Are they two different types of fabrics?
-
These are my second pair of XHS. They seem to be slightly lighter in weight and thinner than 777-XHS. Are they two different types of fabrics?
They are the same fabric at the base, but different dyeing techniques involve different processes and that will change the hand of the fabric noticeably. On traditional indigo jeans only the warp is dyed, and the weft bleached. Here you have two different dyeing processes, one with sulphur, and one with reactive pigment. That creates quite an effect.
