Time For a New Jeans Cut….

[Giles]

Think about it, you want the selvedge side seam, yes.  So how do you vary the taper and retain the selvedge side seam…..

[spitfiredealer]

I thought on some cuts you were doing this. So it goes straight down from say 34-37. So for example a 8" hem at 37 is still a 8" hem at 34 as opposed to becoming wider and losing the taper.

[Giles]

No.  I have made some cuts have, let's say 8" cuff at 34", but the taper continues (it has to) to say 37", where the cuff will be a few mm smaller than at 34"

[spitfiredealer]

Right gotcha

[mpukas]

@Giles:

…So how do you vary the taper and retain the selvedge side seam.....

@Giles - I would assume the same way you vary the taper for the rest of the leg and keep the straight slevedge outside seam - by varying the cut/taper on the inside seam. The taper is different from crotch to knee (13" +/-) than from knee to hem, so why not again different (i.e. straight) from 33" +/- to hem? Just curious… Thanks. mpp

[spitfiredealer]

G Any word on the sample yet?

[Giles]

If there was, you'd already know about it…..

[Dion]

Depending on the final measurements I'm planning to grab either the new (lot yet to be announced) cut or a 634.

[browniemcghee]

G, would you consider releasing this cut in the upcoming 21oz. ii? I think that releasing this cut initially in the new denim would probably create a big buzz and create lots of new converts to this cut.  Just a thought.

Sent from my SM-G920F using Tapatalk

[mpukas]

@browniemcghee:

G, would you consider releasing this cut in the upcoming 21oz. ii? I think that releasing this cut initially in the new denim would probably create a big buzz and create lots of new converts to this cut.  Just a thought.

Sent from my SM-G920F using Tapatalk

Where is this new 21oz denim being discussed? Cheers! mpp

[Giles]

The new 21oz is a non-selvedge denim that H is working.  It is designed to be a wabash…....If the bleaching does not work (and H is concerned it may not), then he will consider doing jeans out of it, but (and that is a big but), it is non-selvedge....

[mpukas]

@Giles - Thnx

[browniemcghee]

Yes, thanks for the info, G. I wish that lack of selvedge weren't a deal breaker for so many, but I understand it is.  I don't really care, but hey.  I know it is pointless to lobby at this point, but these in the new 18oz. Vintage would be killer.

Sent from my SM-G920F using Tapatalk

[mpukas]

@Giles - forgive me if you already stated this, but what denim(s) are you considering for the new cut? Thnx. mpp

[Giles]

21oz to start with.  No other thoughts yet….

[neph93]

@Giles:

21oz to start with.  No other thoughts yet….

I am ridiculously excited about this. Especially after bottling on the Pronto jeans. Has the sample been made yet?

[mpukas]

Yeah, I'm anxiously awaiting updates on this too 

[Giles]

@neph93:

Has the sample been made yet?

I have not seen it yet if it has…..

[spitfiredealer]

I am super excited for these too. Really hope they turn out well.

[manufc10]

Yep, same here.  Looking forward to these.