Samurai Jeans
-
Hence far more breathable, and much softer than Samurai 21oz VX denim
-
imo, tightness & type of of weave are just 2 of the factors. kind of cotton used & post-loom/finishing process involved also affects denim behavior pertaining to shrink/stretch.
IH uses same [maybe a couple of mills] for their jeans. hence, the consistency.
Samurai got several__ just to maintain the constant change & variety of denim in their offerings. -
Hence far more breathable, and much softer than Samurai 21oz VX denim
correct me [any1] if i'm wrong, but the softness comes from the long sliver of the Zimbabwean cotton fibers & thickness/gauge of the yarns used.
-
Spoiler…..Weave tension in Iron Heart 21oz selvedge is very low......
Like I said, I'm not an expert by any means.:) No surprise my conjecture blows.
And I expect you're right, BrownIcon, though as we've seen, my view is suspect at best.
-
Nope, you're right
(I think) -
You're right on the mark Brown, longer fibers do make them softer which is why the SR denim is my
favorite of all time. Samurai does weave tight and at first the denim is very abrasive, especially on my 510's. -
That's why IH is the perfect denim, heavy, soft and retains it's size or very close to it.
-
That's why IH is the perfect denim…
amen
i think SAMURAI is more a JOKE DENIM or is more happy to try out new things…like a surprise bag;-)
-
Samurai likes to experiment Alex, that's for sure! Nothing wrong with that either but when you're spending
that kind of money on jeans you want them to fit and not shrink beyond tag size to the point where they're
unwearable. IH is consistent and true to weight. -
Wish mine fit as good as yours do Alex!
-
LUV IH denim, but if you're not into slim cuts & prefer the likes of a 634, how many IH pairs can one have?
Samurai allows denimheads to foray & experience different denims on a preferred cutas for proper sizing, one needs to ask questions about denim behavior [eg, re shrinkage] before copping.
-
Agreed Brown, I did research on the 510's before I bought them and it said to go TTS so I got a 33 waist.
After the first cold wash/dry I could hardly button them, pre-wash fit was about an inch and a half larger which
was fine but once they were dry they were too small.
Aside from IH I've been buying other Japanese raw denims in a 34 and they've all been fine, I'm going to work
on the 510's though, see if I can get them to stretch in the waist. -
Agreed Brown, I did research on the 510's before I bought them and it said to go TTS so I got a 33 waist.
After the first cold wash/dry I could hardly button them, pre-wash fit was about an inch and a half larger which
was fine but once they were dry they were too small.
Aside from IH I've been buying other Japanese raw denims in a 34 and they've all been fine, I'm going to work
on the 510's though, see if I can get them to stretch in the waist.texas cotton will stretch some more down the line.
as for now, you just need to flex the waistband.if i may suggest__ wet the top block : pull to stretch the waistband : button up & stick a hanger or w/e against the waistband [w/c is about your waist size] : & let dry.
always stick the hanger before you soak & keep it till they fully dry.
do [this] routine to temper the waistband until the denim soften up from wear & stabilizes -
This is not a jeans - so you can not compare the cut…
For a first indication on sizing and prices go to Rakuten:
http://global.rakuten.com/en/store/2nd/item/sj-sj42cp/I'm sure there are other Rakuten shops that have them. It's only a question of time until people will show up with pictures and actual measurements.
Sent from my iPad using Tapatalk HD
-
damn, I missed a lot of conversation
@Mild7: no I don't own the chinos. They are scheduled for the end of September but you can pre-order them right now.
The official fit pics don't really convince me so far. The fabric looks interesting though
