IH-888-XHS - 25oz Selvedge Denim Medium/High Rise Tapered Cut Jeans - Indigo
-
Man, such heavy denim too tight sounds miserable. I wonder how long it would take for that waist to stretch back out. Maybe I should go on a diet to prepare
Such heavy denim is going to be uncomfortable ar first anyway, at least compared to your 21oz OD. It will stretch with wear so you’re looking at a few days of discomfort only. Worth it for what is probably some of the best denim I’ve ever come across.
-
I wasn’t questioning soaking, which I understand is a best practice to embed the constructional stitching and often good for fit. I do it with all my jeans. I was questioning whether eking out ever millimeter of potential shrinkage at extreme temperatures is necessary or even advisable. To each his own, was just curious if I’ve been doing it wrong.
Either way, watch out you don’t burn yourself on a molten rivet, team!
-
Ok I’m the same way. Thanks @neph93 I didn’t know whether the guidance had changed. And maybe it’s the cuts and fabrics I’ve chosen but I’ve never had a pair of jeans injure or inflict pain on me (and probably lack the commitment to tolerate such; I prefer for the abuse to flow in the opposite direction), so Imma stay the course on cuts and soaks
-
That's what I do, but I believe agitation has a role to play in shrinkage as well, so perhaps some folks will "stir" the jeans to get a little extra shrinkage out. Since that occurs in the washing machine as well, this makes sense to me.
Basically, I personally don't try to exceed the conditions that the jeans are going to encounter naturally over their life. I use water that is hotter than any cycle I will run, though not astronomically so, so I have not had to stir. It seems that going to extremes could impact the fit and the construction in ways that might be unpredictable or unappealing. But this is speculative, YMMV, to each their own, etc.
-
My initial soak has almost always been a trip through the washing machine. I just make sure the jeans are inside-out and soaked fully through before letting the cycle start. I usually go ahead and run em through the dryer, too. Since that’s the treatment they’ll be getting later, I figure it’s best to get any change in fit out of the way.
Sent from my iPhone using Tapatalk
-
@cwcaswell I've been soaking my jeans like this for a while now and I try and get as much shrink out of the inseam as I possibly can. I do this because it's fun, and on the 888 cut the legs are pretty roomy. So I can get away with it. Basically along the lines of what McClain so eloquently stated above, all the uncomfortable parts you can shrink as much or as little as you want and the rest, you can shirink as much as possible.
I have had so many different pairs of XHS and I used to do no soaks or water, or just gentle soaking, and now I get the inseam as hot as I can- so try and get as close to an inch of vertical shrink in the inseam as I possibly can.
-
Same ethos as @sabergirl … When I wash, I do a gentle, spinless cycle and hang dry (all inside-out), so those details differ, but the idea of putting them through something like what's to come is what we have in common. I would love to do exactly what she does, but I have had bad luck with marbling, creasing, and drying machine stains when I have spun and tumbled raws in the past. Usually an overnight hang dry gets them at least close to wearable (though I would expect that to extend on the 25oz).
-
@Filthy:
@cwcaswell I've been soaking my jeans like this for a while now and I try and get as much shrink out of the inseam as I possibly can. I do this because it's fun, and on the 888 cut the legs are pretty roomy. So I can get away with it. Basically along the lines of what McClain so eloquently stated above, all the uncomfortable parts you can shrink as much or as little as you want and the rest, you can shirink as much as possible.
I have had so many different pairs of XHS and I used to do no soaks or water, or just gentle soaking, and now I get the inseam as hot as I can- so try and get as close to an inch of vertical shrink in the inseam as I possibly can.
That's something you won't see Martha Stewart doing anytime soon.
Do you keep the water to make a reduction?! Just kidding of course. I've hot soaked but never boiled jeans. Don't they boil wool?
-
I should clarify that I boil the water first, turn off the flame, and then let it soak until cool. I like to tease Brock about drinking the water. But I use the water to water the plants. The water was so black from that pair, I just dumped it in the grass outside.
-
Same ethos as @sabergirl … When I wash, I do a gentle, spinless cycle and hang dry (all inside-out), so those details differ, but the idea of putting them through something like what's to come is what we have in common. I would love to do exactly what she does, but I have had bad luck with marbling, creasing, and drying machine stains when I have spun and tumbled raws in the past. Usually an overnight hang dry gets them at least close to wearable (though I would expect that to extend on the 25oz).
Yeah I don’t know if I’m ready to do the dryer. I’m already in the rhythm with cold/lukewarm washing & hang drying most of my clothes (with the exception of socks, underwear and under shirts) so these will get the same treatment. Maybe I should wash these warmer though because I could imagine 25oz denim absorbing a lot of dirt & sweat… but yeah, definitely not ready to throw in the dryer
-
@Filthy:
@cwcaswell I've been soaking my jeans like this for a while now and I try and get as much shrink out of the inseam as I possibly can. I do this because it's fun, and on the 888 cut the legs are pretty roomy. So I can get away with it. Basically along the lines of what McClain so eloquently stated above, all the uncomfortable parts you can shrink as much or as little as you want and the rest, you can shirink as much as possible.
I have had so many different pairs of XHS and I used to do no soaks or water, or just gentle soaking, and now I get the inseam as hot as I can- so try and get as close to an inch of vertical shrink in the inseam as I possibly can.
I don’t really have the room to afford a shrink like that, but I definitely could have used that on this pair of 3sixteens I had a few years ago. Ended up having to give them away they were too big
-
@Filthy:
I should clarify that I boil the water first, turn off the flame, and then let it soak until cool. I like to tease Brock about drinking the water. But I use the water to water the plants. The water was so black from that pair, I just dumped it in the grass outside.
I was just imagining the type of hi-jinx that could occur if you had someone over for dinner that you didn't like. -
I imagine that sulphur would be pretty zesty.
-
Picked up a pair from the summer sale.
-
@adam313:
WOW ???
-
I gave these a soak with no agitation in some Lysol and a starch on the inside. Now that it is cool again I will resume wearing these. The 822 pair I was wearing will get shelved until the Spring of next year.
-
Fashionably late to the thread. Used a kitchen steel to stretch the button fly holes, thumbs still hurt like hell. I have the best wife a guy could ask for. Alright I’m hot I have to get these off.
