IH-777S-21 - 21oz Selvedge Denim Slim Tapered Jeans - Indigo
-
-
thank you fellas.
-
-
Does anyone have experience with these and a 634 or 888 cut? I’m wondering if the inseam length needs to be changed due to the lower rise? Short of having a tailor measure me up I will be hemming based on my other jeans. Let me know if I need to clarify. Thanks
-
I would measure total length of the Jean from the outseam. Better to be a tad long and be able to wash carefree than a little short and never wear them.
Sent from my iPhone using Tapatalk
-
Thanks bud. I appreciate it
-
I assume the difference in the rise is about 1". As the 777 should sit lower on the hips than the 634 / 888 I would think that this 1" will for the most part be "added" on the torso. So the inseam length should be rather identical. At least i think my 777 inseam is not too different from Jeans with a higher rise.
-
Put them on with your footwear of choice, stand up straight and get your beautiful wife to fold the hem inward until they sit how you want. Then stick a pin in it to hold the excess in place and measure. It’s 21oz so there really shouldn’t be any shrinkage, but give yourself a centimetre extra just in case and for loss of length due to ‘combs.
-
Thanks fellas. im sending them out to indigoproof today and the wife is not with me. My brother could help
Me though! Thanks guys. I know that’s the obvious answer to have someone help, but I was trying not involve anyone else in my neurosis. Lest they see behind the curtain. -
When I ordered my 777’s I had them hemmed to the same length I as I do for all my 666’s and they fit about .5”=.75” shorter.
-
Thank you very much @xtcclassic that’s a tremendous help
-
You could do what neph recommended on your own, it's just going to take a little longer to get the correct length.
don't let anyone see behind that curtain, you will never hear the end of it.
as a way to poke fun at me my wonderful spouse has various passwords (that we share like joint accounts and alarm systems) with reference to denim and iron heart and she always finds it funny when say the motion detector is set off and the alarm system folks call and I have to tell them my safe word is "chainstitch", "honeycombs", or "jean pocket" jeez ::)
-
Does anyone have experience with these and a 634 or 888 cut? I’m wondering if the inseam length needs to be changed due to the lower rise? Short of having a tailor measure me up I will be hemming based on my other jeans. Let me know if I need to clarify. Thanks
Hey Matt. I’ve have experienced all those cuts. For the 777 I made my inseam .5” longer. However I usually cuff this pair.
I will also support Max’s statement on that it shouldn’t have too much impact on the inseam since the rise is all where is lays on your hips
Hope your tailoring goes well.
-
Thanks @Fadez I’m thinking I’ll leave it about .75 longer than I
Normally would. I can always hem them again. Too long doesn’t bug me. Too short is a disaster -
You could do what neph recommended on your own, it's just going to take a little longer to get the correct length.
don't let anyone see behind that curtain, you will never hear the end of it.
as a way to poke fun at me my wonderful spouse has various passwords (that we share like joint accounts and alarm systems) with reference to denim and iron heart and she always finds it funny when say the motion detector is set off and the alarm system folks call and I have to tell them my safe word is "chainstitch", "honeycombs", or "jean pocket" jeez ::)
Haha. Thanks @Madmonday I will give it a whirl now before I drop them at the post office. That’s a funny story. Thanks for sharing.
“They mustn’t see.”
-
Got these back from indigoproof yesterday. Haven’t taken them off since. I missed the 21oz. Fit pics in the next day or two or 3. I love these
-
Got presents today.
Did anyone work up a sweat trying to button these? I’m glad the buttons didn’t pop off! Loving the 21 oz. so far it definitely feels like quality material. can’t wait to see how these break in and develop.
-
@RoxRocks86 awesome fit!
