IH-830-IND - 10.5oz Herringbone Painter’s Pants - Indigo

[Slash]

I must say I feel a bit sad as a 555 model lover
All non-denim pants of SS26 are wide in essence.

This fabric and colors looks really nice, and I definitely need something light for summer.
I bought IH chinos last year, but it's still too hot sometimes.

I know air circulation is paramount when hot, but painter/backer/wide paints are a bit baggy for me.
Hope IH wll do some more slim options in lighter fabric later down the line

[JoshC]

@John-Galt we didn't get any im afraid. But we can check with Japan and we will let you know.

[Tago Mago]

@Slash realistically, if you want air circulation a looser cut will be the way to go. The slimmer a cut the less air circulation you will get. It’s basic physics

[John Galt]

@JoshC said in IH-830-IND - 10.5oz Herringbone Painter’s Pants - Indigo:

@John-Galt we didn't get any im afraid. But we can check with Japan and we will let you know.

@JoshC yes - greatly appreciate if the team can check if a tag size 28 can be snagged from IH Japan - I’ll take them and take a chance on the dimensions working via integrating down from the posted tag size 30 & 31 dimensions. Thanks in advance!

[Alex_24]

@tvaillant75 As mentioned by @goosehd these are a twill weave so there should be 2-3cm of stretch available in the waist.

That said, I like my pants relatively loose, especially a lighter-weight painters pants, so I go with the measurements as close as possible to what I want them to be, knowing they’ll loosen up a bit. That’s what belts are for. But that’s simply my personal preference.

With these I’m right in-between waist sizes, but the thigh measurement is important to me because that does not stretch, so I will probably go with the larger waist size to be sure I have enough room in the thigh, and put a note in the order asking the IHUK Crew to find me one as close to my ideal waist size as possible with my minimum thigh measurement.

[baz]

Think these are going to be purchase of the summer. What do I need to measure if I decide to hem them. Thanks

[goosehd]

@baz Please use this guide for any information on how to measure bottoms per the IHUK method: https://ironheart.co.uk/pages/how-we-measure-bottoms

[John Galt]

@ShopatIronHeart any feedback if that tag size 28 still showing available on the IH Japan website could be snagged for my purchase? Thanks in advance for any info provided.

[John Galt]

@ShopatIronHeart Cancel my request for the tag size 28 from Japan please - I just realized that the rear rise on these run at least an inch lower in comparing the tag size 30 to both my black and indigo wabby painters I purchased in the past, and therefore would require a larger waist than previous. Thanks though if started the ball rolling already and my apologies.

[Ross]

@John-Galt No problem at all - I'll pass this along to @JoshC for you!