IH-888S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim High Rise Tapered Cut Jeans

[chucklando]

I gave mine an initial 2 hour hot soak followed by cool rinse in the bath tub. I wore them for about a week and was surprised at how baggy they still were, so gave them hotter soak with some detergent for 4 hours followed with cool rinse. After they dried fit was what I expected. I’m sure there’s still a little more shrinkage but I think that got most of it.

[edubz]

Thanks for all the input! Much appreciated.

[Fades for future]

@edubz Just soak your jeans for a few minutes in a tube and put em in the washing machine. Turn your Jeans inside out before....Never had problems with marbeling this way...

[Chruschtschow]

Any news on restocks of this or any other heavy 888?
According to the plan I need a new pair in March.

Thanks.

[edubz]

Any restock dates in sight?

[AdamJ]

@edubz July

[edubz]

@AdamJ Nice. Thanks!

[drewfonse]

Snatched up the last pair available in my size, sized down one from my normal 30 in an 888.

Challenge accepted, UHR. You shall be biked to work.

[Mizmazzle]

@drewfonse hell yeah!!

[Matt]

Be careful with sizing down. They shrink when hot washed due to the raw state. They stretch back out but mine never got to a comfortable waist measurement and I had to let them go.

[drewfonse]

@Matt

I hear ya. If they shrink an inch, I should be good after wearing and stretching. I may warm instead of hot soak and then cold wash if they fit a little too well initially.

[Matt]

God’s speed friend. 🫡

[drewfonse]

Bad pics, apologies.

I decided on the 29, one size smaller than my normal 888. Glad I did. I ended up cold soaking and cold washing. I know I may run in to a little more shrinkage, but I’ll keep the water cold with these. They fit well. Same slightly balloon-y front crotch area until it relaxes. I love em. And yeah, after the soak, preposterously stiff haha. Like buttoning up cardboard. Needle nose pliers were a godsend!

[drewfonse]

Considering the weight and sheer toughness, they feel really good. I’ll probably get another 3/4” taken off of length

[TinMan]

@AdamJ possible restock this fall?

[Graham]

@TinMan The UHR is coming in all cuts this fall indeed. We have had a few cuts arrive already, the 555 are due next and then the 888 should not be too long after.

[Mizmazzle]

@Graham sweeeeet!!!

[motojobobo]

@Graham any 633s headed to SelfEdge? I need to try out what the UHR hype is all about after 10 years with the IH brand.

[goosehd]

@motojobobo To date, there have been no 633's in UHR. May have changed though.

[TinMan]

@Graham hellz yeah!!