IH-634S-18 - 18oz Vintage Selvedge Denim Straight Cut Jeans - Indigo
-
To be completely accurate, it is not the chain stitch itself that causes the roping. It is the folder. The folder, obviously folds the cuff before the needle puts a stitch through the denim, but it also adds differential friction to the bottom part of the folded hem versus the the top part, this results in the weft shifting slightly through the upper and undersides of the stitched hem, it is that weft offset that causes the roping. I could hem a pair of jeans on a 43200G and get zero roping if I manually folded and basted the hem before doing the final stitch, obversely if I used the same folder on a flatstich machine, I could achieve roping....
-
These look great and the rise measurements are quite similar to my 888s which makes now consider these for variety instead of waiting on 888 21oz. Hmmm...
-
-
@cyclops Your closet called, you definitley need another pair!
-
I got mine the other day too. Super happy with the fabric and the fit.
-
Cool denim. Its great to have another 634 in my lineup. Thanks Vik for your help in sizing!
-
After a few days these are becoming one of my favorite jeans ever. I love how the fabric feels and I really like the fit of these for a slightly more relaxed silhouette. I’ve mostly worn slimmer cuts before but I have a pair of the 21oz 634’s, which are significantly wider below the knee. I like the fit of these 18oz 634’s a lot more.
-
I picked up a pair of these because I wanted variety to my 21oz and 25oz 888s. I am very happy. I also went down a size to 38 from 40 which is another reminder for everyone to always refer to the size chart and not the tag size alone. I wear my 888s a bit relaxed and I like that with the heavier denim. These in 38 worked super well for me while before I tried 21oz 634s and they did not.
Coming down to 18oz already feels significantly lighter to me and I don't mind that the top block is a tad bit more snug when the fabric is a bit lighter compared to my 888s. The main thing for me was that the rise was not too different from my 888s ( something that put me off with 634s I tried before ) Just gotta get used to the slightly bigger hem, but the jeans drape so nicely already. I dunno if my ultimate would have been to wait for the 18oz 1955s but I am certainly happy I got these because they feel like a year round pair and I now own a pair of the OG cut. -
@El-Fanatico my pleasure, I'm glad you like them!!
-
-
I wasn't sure if the following question warranted its own thread or if asking here would suffice; the IH 634 seems like a good option for wearing with cowboy boots, yes?
I tend to look at both rise and hem/leg opening as to what might work with cowboy boots - usually settling on something between 8 and 9 inches, with the sweet spot right in the middle. The 634 seem like they fit that bill. My template is the Wrangler 13MWZ, which, despite its high rise, I like quite a bit everywhere else, so it's my reference. I found some Mister Freedoms in two different fabrics that are similar, but I always return to Iron Heart.
The 18-oz seems to strike a good balance between the 14 and 21 adn 25 heavyweights. Am I on the right track here?
Safety third
-
@Bobcat-Sig. Yes you are provided that you are ok with the lower rise of the 634's
-
I wear mine with ropers and slim shaft engineer boots, I feel like it’s a great fit with that type of boot
-
@yannis said in IH-634S-18 - 18oz Vintage Selvedge Denim Straight Cut Jeans - Indigo:
@Bobcat-Sig. Yes you are provided that you are ok with the lower rise of the 634's
It should be all good. I have a pair of 633s SBG that fit well, if a bit tight in the waist, so a 634 with a comfortable waist should be nice.
Truthfully, I tend to wear the 13MWZ and IH 888 more at where I typically wear my pants, which is lower than what Iron Heart would say for the high-waist cuts.
@northsouthdenimguy said in IH-634S-18 - 18oz Vintage Selvedge Denim Straight Cut Jeans - Indigo:
I wear mine with ropers and slim shaft engineer boots, I feel like it’s a great fit with that type of boot
I can dig it. While I don't have anything like a Mr Lou - my foot sports too high an arch to make those work - I gotta believe that my cowboy boots have similar shaft circumference to that of engineer boots.
Really what I want, and this might be sacrilege, is an Iron Heart version of the 13MWZ. The 634 seems close.
-
@Bobcat-Sig they did do a 14oz broken twill at one point which is closer to wrangler. Not sure which cut would be the closest.
-
@wjw Nice! That's intriguing, but not a requirement. Good to know. Thanks!
When I joined IHUK, 18oz was the first denim I tried — always loved the fabric, but didn't get on with the 555 cut I initially went with. I missed out the last time it restocked, so wasn't going to let it pass me by again!
