RE:LOVE - Repurposed — Iron Heart, Reimagined

[goosehd]

@Lynne Even better…what happens in Vegas stays in Vegas…Gos that is.

I hope you two have a fantastic time…

[Lynne]

A new take on the Swatch bag. Instead of being made from hemming offcuts, this one is made from a pair of jeans. As such its original patch is sewn on.

This one also has a logo’d Tshirt for the lining - the heavyweight material works perfectly.

Haraki San was playing around with it the other day and immediately turned it inside out to look at the inside. We all agreed at that point that the bag looked as good inside out, as outside in.

On top of this, we can now offer this as a bespoke piece for you. If you have jeans and an old Iron Heart shirt or Tshirt, we can make your own (very) personal bag. Message for details.

Oh, thank you to my glamorous assistant!

[Ross]

plugin-calendar-event-wrapper:start |||RE:LOVE - Repurposed Restock|||

RE:LOVE - Repurposed Restock

[[moment:time-date-view, utc, 1771603200000, 1771603500000, false]] UTC
See time in your time zone

IH-RELOVE-COA Restock
IH-RELOVE-SCW Restock
IH-RELOVE-DCW Restock
IH-RELOVE-KYR Restock

[[calendar:response_no]] [[calendar:response_maybe]] [[calendar:response_yes]]

[[calendar:response_yes]] 2

[[calendar:response_maybe]] 0

[[calendar:response_no]] 0

plugin-calendar-event-wrapper:end

[Ross]

We have the addition of some Black Wristlets and Keyrings on this restock

[Lynne]

This month I’ve focussed on black denim. Lots of fresh and faded goodies going online today. Wristlets, keyrings and coasters looking super sharp, with indigo options too. Black bags will be online in two weeks, if you want a matching set

[Ross]

Keychain RESTOCK

Coaster RESTOCK

Double Cuff Wristlet RESTOCK

Single Cuff Wristlet RESTOCK

[68degreesorless]

@Lynne I'm not sure if this is possible, but we found this denim pot holder a year or two ago and use it all the time, but would of course love to see an IH version made of heavy denim. It's already a bit worse for wear. The challenging parts would be: 1) need a thick, insulating material sewn in behind the denim, and 2) as you can see, we've caught the handle-facing edge on fire a few times so I think a more fire-resistant material piece right there would make sense - maybe a nice piece of leather?

[MM]

Any details on the hats? Kilties might be cool too

[Lynne]

@MM yes, we’re just finalising finished sizes.

Our most common sizes are

• Large to fit 59-60cm
• XL to fit 61-62cm

How does that fit with you?

I am working on a cap, but firstly there will be a few bucket hats in Relove denim and flannel lining coming in March.

We’ve been discussing kilties internally. I’m going to look at our Wesco ones tomorrow alongside some remnants of natural horsehide we have, and see if we have anything that works.

Do you have a particular style in mind eg do you prefer the split tongued ones, like our Wescos, or a rounded edge?

https://ironheart.co.uk/products/ihwe-kiltie?_pos=1&_psq=kilties&_ss=e&_v=1.0&variant=49512689074442

[Lynne]

@68degreesorless I wouldn’t have any fire resistant material in Relove, but we do have some scraps of natural horsehide and natural buck.

(I’ve been working on a buck-backed coaster today )

I’ll have a think!

[MM]

@Lynne
That sizing sounds fine, will stay tuned for more.

On the kilties, I didn’t really have anything in mind at first, it just seemed like a nice but relatively easy way to utilize some denim scraps. Though now that I think about it, having a snap near the bottom could be neat; throw an upgraded silver snap on there, that’s probably what I’d opt to do.

[Lynne]

Tool roll update.
Following everyone’s input, here’s a first draft.

45x25cm flat size noted. We can get near this depending on what jeans we have - this finished size is 43x24cm.

Pocket sizes noted. We have 2x 9cm, 3x 3cm, , 2x 5cm and 1x 4cm on this option. I’ve not sewn them down yet in case you have further thoughts. Pocket depth is 11cm.

Tied with a belt loop.
Final product will all be finished off properly, so ignore loose ends for now

This is a 25oz denim, as I don’t have anything lighter atm.

Thoughts?

[labrat]

@Lynne that looks amazing

[Aetas]

@Lynne Just beatiful!

[pechelman]

looks great. Maybe one suggestion?
From the selvage to the right, have those pockets angle downwards a little so that they arent full height at the end. Helps to be able to put shorter tools in without them becoming buried or fully obscured by the pocket itself.

Also, is that tie strap sewn to the roll itself somewhere?

[Lynne]

@pechelman feedback was that some like a slope some don’t - I see the merit though! I could do a variety depending on what shape fabric I have. (FYI There will be a mix of 14->25oz, I may have enough for one or two ducks.)

Yes, the belt loop is one length folded and double stitched into the side seam ie near the outer edge and near the inner edge.
The team here are testing it atm.

[Jett129]

If instead of a strap you have 2 little belts it could possibly function as a handle bar bag on a motorcycle. Could be a really nice present for Haraki.

[labrat]

I’d be interested in seeing more detail on the belt loop—it sounds like a clean, solid idea. That said, I wonder if it might be better to skip a permanent belt loop altogether and instead use a leather string or cord of some kind for contrast?

[Lynne]

@Jett129 I have a leather Brooks tool bag like that. Beautiful. We have some small leather remnants from our jackets that I may be able to fashion small straps from. I’ll add to the mood board

[Lynne]

@labrat love a leather cord! I don’t have a very much long enough leather that I could cut a cord from. And, of course, I don’t buy things in, as this project is to only use what we have spare, but I will keep an eye out. Perhaps some old leather laces or the paracord we use might come up too

Oh, just had a thought that I may be able to spiral cut a small piece of buck to make a cord…I’ll be back…