Motorcycles
-
@goosehd decided to add another layer before clearcoat. Going with a black tint candy. The silver is too bright for me and the contrast is a little much. I think adding some black candy will tone it down but add depth. Guess i gotta wait for snail mail again...
-
@WhiskeySandwich Excited to see how this turns out…
-
Well that didn’t go at all how I envisioned. The “black” candy was more like a midnight blue and almost negated my entire tape masking job. It only barely shows up with a flash or sunlight. Def needs a wet sand with so many layers now. No solution but to add more paint though!
-
@WhiskeySandwich looks pretty damn good to me! Sleep on it and take it out in the sun tomorrow.
-
I’ll give it a try, it’ll def be sparkly as hell but it’s just… plain. I may give it a wet sand and re-tape for a shot of pearl over top before clearing
-
-
@WhiskeySandwich just needs a red W
-
More wet sanding to reveal the pattern. Dig the fauxtina. Clear it or redo it?
-
I agree with scooter,it’s really cool,unique,and makes me think of faded denim.@WhiskeySandwich
-
-
@WhiskeySandwich I love it!
-
@goosehd I’m kinda digging it. It worked out in an unexpected way. I like that it looks like faded denim, but the best part is because I layered so many effects and sanded down the highs, the silver beneath is the base silver coarse metallic, I didn’t get into the primer or bare metal, so it should all glitter a bit.
I’m going to do a few coats of inter-clear first to see how it pops and go from there.
-
@WhiskeySandwich have you put something chrome or satin black next to it, just to see what would be the best contrast to that paint?
-
@tody I set it on the bike for a mockup and it looked kinda cool
-
Just adding effects at this point. did a mist coat of the silver metal flake base, then topped it off with a ton of silver pearl over it to ghost the previous effect. Gonna roll with it and 2K clear it.
-
Mockup
