IHJ-142-IND - 21oz Serge Windbreaker - Indigo

[JunkPants]

@Mister_Brue Please buy one of these so we can all enjoy the fades!
I feel like this one has some serious fade potential. (The black version as well).

[Mister_Brue]

This post is deleted!

[AdamJ]

Courtney wears XXL

Bailey wears Medium

Graham wears Large

Josh wears 3XL

You can view the crew's vitals here

[MSav32323]

Product seems to have disappeared from the site FYI

[Graham]

This is totally normal @MSav32323 as we prepare for launch (enter stock numbers, final QC checks, move it from the future category into the new in / jacket section etc)

[MSav32323]

@Graham gotcha! Thanks! Also curious about this fit on you, Graham. I have very similar measurements, only 3” shorter and 15lbs lighter. I have a short torso so I’m a little drawn to the size small for the length, but should maybe go medium if you wear a large. How tight/loose did the Large fit you?

[AdamJ]

NOW LIVE

[Brock]

Is this jacket lined? Can we see a pic of the inside please?

[labrat]

Am seeing good art ... To snag or not to snag

[Jcaz6996]

@Brock From what I understand it’s unlined.

[Giles]

If it was lined, we would describe the lining and have pics of it in the product description.

But we probably should say unlined for the avoidance of doubt.

[Brock]

Got it!
Thank yoy

[Mister_Brue]

This post is deleted!

[Brock]

@Mister_Brue now I’m being confusing… I meant that as a reply to Giles, I haven’t purchased the jacket. Not yet Atleast!

[Ben]

@Mister_Brue The diameter of the snaps on the IHJ-142-IND is about 15mm, hopefully that helps

[Graham]

If we're thinking Good Art, then I would fire sure go for the 17mm as the 14mm would just be a hair too small silhouette wise.

[Alex]

I think they are the same as the IHJ-60

[MSav32323]

@Mister_Brue Hey there, I upgraded to the copper snaps, and should arrive Thursday per UPS ETA. I'll send pics (if you're able to wait until then:)

[MSav32323]

Question about measurement; are sleeve measurements including the cuff? Or to the end of the serge portion? I'll know in a few days when it arrives, but figure some others may be curious. Thanks in advance!

[Graham]

@MSav32323

All the way to the end of the cuff.

@Mister_Brue Any indents will drop out, i just wanted to say that the 14mm GA will look a little small compared to the 15mm ish stock snaps so if one were going for a GA piece then I would go for the 17mm as a little bigger would look better than a little smaller.