IHSH-62-IND - 12oz Wabash Western Shirt - Indigo
-
Hm. Crocking has never been an issue with mine. Many years in and she’s barely faded, though I’ve seen some impressive fades on the fabric from others.
-
Caved and grabbed one on eBay with white snaps(now I can stop bothering @AdamJ about the workshirt lol) it was a little big but happy with the fit after a hot wash and dry.
-
@october-rust it will shrink a bit more after a second wash or three as well.
Those white snaps are sweet too!
-
@Mizmazzle said in IHSH-62-ind - 12oz Wabash Western Shirt - Indigo:
@october-rust it will shrink a bit more after a second wash or three as well.
Those white snaps are sweet too!
Yeah the white snaps sold me! I think the seller said he washed and dried for shrinkage too, so this is at least the second time through but it’s still noticeably smaller than when it arrived. I’ve had really successful results shrinking this down, as well as the Hickory stripe western- on that one I think I got the pit to pit down 2” with a couple trips through the washer/dryer.
-
@october-rust it’s such a cool shirt. I Probably get the most compliments on this one.
-
Guys I need your help! The shirt just landed and the sleeves are ridiculously off it seems. Anyone else experiencing the same problem? The sleeves of the 2XL 62-IND I just bought exceed the measurements of my 3XL 62-BLK, see pictures.
Hot wash and hope for shrinkage? Otherwise I’ll have to return I guess.
Shoulder and chest are alright, but the sleeves look like balloons..
Sleeve comparison 2XL 62-IND vs. 3XL 62-BLK
Upper arm
Sleeve opening
Sleeve length
-
@weftyarn I’m rocking a 70.5cm sleeve on my XXL and could still ideally do with and extra 0.5-1cm
. Because I have stupid long stupid arms.Is it the opening ‘along’ the sleeves that is the primary concern for you? @FlavourFade also noted a ‘bulkiness’ to the sleeves. Mine probably the same? (See above). Out at the moment so can’t compare with measurements.
-
Thanks for the quick feedback! It is only the part between shoulder seem and elbow that is concerning me… Which is exactly the part that doesn’t show up in the charts so that’s why I had no clue. No one to blame here except me, I should have had a closer look at the pictures probably. They all seem to show that ballooning upper arm.
-
@weftyarn My XL Indigo Wabash has the largest measurements of all of my xl shirts. It has the longest body, the longest sleeves, widest sleeve openings, and to your concern, the largest upper arm area.
I will say you can wash it hot and get some shrinkage but it does relax back out close to original dimensions. I am fine with this one fitting a bit oversized, as sizing down would be too snug p2p for me. I would probably feel better in the work shirt version xl dim's but I haven't taken action. I just avoid a really slim pair of jeans and i roll with it.
In the end, will you reach for it if you don't fully embrace it?
-
@jordanscollected exactly the feedback I needed mate! Will return it and hope the XL works / have a look at the Work Shirt dims.
Thanks for your help. This is one of the reasons I just love this forum.Use it or lose it.
-
@weftyarn I have both from last year's batch and that's it, the black Wabash is definitely smaller and shorter than the indigo, at least in size XS, it was good for me, the second one I got the black one, I feel definitely better on me, but in the end I love them both, one for the color and one for the size.
-
@weftyarn these shirts will shrink a good amount over the first few washes. Mine was pretty baggy when I first got it. It fits much shorter in both sleeve and body now. Probably lost .75-1” in both. The chest and waist came in some too. The ballooning calmed a lot too as the fabric softens. But I don’t recall the ballooning ever being an issue I noticed much when mine was new.
-
Mine has arrived. I went for my typical IH size L. Very happy with the fit. Similar to other opinions shared in the recent days, the shirt is a bit bulky in the arms but I do not see it as an issue/problem. I will share more photos here or in the WAYWT thread tomorrow or the day after.
-
If it helps anyone here are the measurements pre and post shrinkage. It was a bit long in the body and sleeve when it first arrived so I gave it a 40C wash in the machine (after a soak), then did the same at 60C as I wanted a touch more shrinkage. It's pretty good now.
-
How does a hot wash affect the fade potential? I think a little less length and tighter sleeves would be perfect but I am afraid of losing a lot of evo in the progress
@goldstone0 thanks for your work!
-
Got mine yesterday in my usual XXL. Really happy for the pimped snaps! Did a hot soak and 60C wash and indeed some nice and significant shrinkage. Much better arm length and upper arm balloon improves! @FlavourFade I am not a contrast fade fanatic, but I don't see much marbeling even after a long hot wash! Would not be overly concerned (I personally see this as a kickstart for fading).
-
@DeeDee85 i’ve had the same with my 361-BLK although this is not a wabash shirt but due the dye, starch and rigidness of the fabric the arms we’re almost hulk beefiness and ballooning. It all settles and after a few wears you’re good to go. My wabash experience is also that it shrinks a bit during the first washes but in the end it’s just me 2 cents.
-
@Tobi thanks buddy! I think I am gonna wear it a bit and then go for a hot soak and wash. I usualy aim for high contrasts but for the wabash I think it would look pretty cool with vintage like fades and just "worn"
