IH-1955S - 21oz Selvedge Denim "1955" Vintage Tapered Cut Jeans - Indigo

[Bill C]

@Giles:

I think once we get the current production bottlenecks sorted out, we will start making the 1955 again. The key problem is that very few retailers take the 1955, so the total order into Japan is always small, and when we are overloading the workshops, small runs cause massive issues…..

thanks @Giles - this is great news - this is a great cut for those of us with a tall frame but regular leg length and    some thigh “power”. I’ve looked around a lot and just couldn’t find a credible alternative from other brands.

[JDelage]

If you have big thighs from weight lifting and the like, pay careful attention to the knee measurements. Those quads will need room just above the knees.

[Mr_Toddie_G]

@Giles:

I think once we get the current production bottlenecks sorted out, we will start making the 1955 again. The key problem is that very few retailers take the 1955, so the total order into Japan is always small, and when we are overloading the workshops, small runs cause massive issues…..
[/quote/]

put me down for a size 36 please

[Mr_Toddie_G]

or if one of the size 35 runs a bit large like 35.5 ish

[Anesthetist]

Did you see The Shop Vancouver just did a run of these in slubby denim? Not sure if they have any in your size but worth asking.

Sent from my iPhone using Tapatalk

[Mr_Toddie_G]

I checked them out and not a fan of the Slubby look . Thank you for sending me down that path though as it would have been an excellent option .

will try an 888 cut soon and if the 1955 restock will more than likely be forced to get them . loving my IH products and wished i found them years ago.

[JohnM]

Love the 1955-UHR and am open to trying it in another denim. Also considering the 888. I’d guess there are some similarities between these cuts.

[Bill C]

@JohnM:

Love the 1955-UHR and am open to trying it in another denim. Also considering the 888. I’d guess there are some similarities between these cuts.

Also considering the 888 during the 1955’s absence. Have any of you 1955 guys tried the 888, and what was/is your experience?

thanks - Bill

[atm23]

I have both cuts. So I think the main difference between the 1955 and the 888 is the front rise measurement. I also think all dimensions in the other areas are a little bigger on the 1955s. The 1955s are the most comfortable pair of jeans I own, a combination of the 21oz and the extra room.

1955 on left, 888 on right, both 21oz

[Bill C]

thanks @atm23 !

[JDelage]

@Bill:

Also considering the 888 during the 1955’s absence. Have any of you 1955 guys tried the 888, and what was/is your experience?

thanks - Bill

For me, the major difference between the two is the knee measurements. The 1955S is my favorite cut, but the 888 is uncomfortable at the lower thigh level.

[Bill C]

@JDelage:

For me, the major difference between the two is the knee measurements. The 1955S is my favorite cut, but the 888 is uncomfortable at the lower thigh level.

thanks @JDelage , based on your and @atm23 ’s replies, my gut feeling is to hold out for a restock of 1955S and/or 1955S-OD  - “form follows function” and “good things come to those who wait”!

[JDelage]

1955S-SLB, just back from hemming. Super comfy fit.

[Bigdog]

I bought a couple pair at The Shop Vancouver, I love the fit of these and looking forward to a restock. I will be stocking up.

[A.V.D.77]

I want to try this model. I have 888 25oz. Can someone tell me 1955 from 888 will be very different in landing?

[sabergirl]

Very little difference, I believe. Subtly higher front rise, maybe a little baggier knee.

[Bill C]

I’ll second @sabergirl’s post above. I have 1955S and 888S-14ii - 1955 is about an inch higher on the waist and there is definitely more room in the knee - it’s a more “old skool” cut, a bit baggier and more relaxed, 888 has a slightly smarter, more fitted look - ymmv …

[Kfactor]

Came in here hoping to see news more of these are coming. Am I right in the news is “hopefully down the line” but nothing scheduled as of now?
I need something sooner than later of course lol

[AdamJ]

@Kfactor current ETA December

[Kfactor]

@AdamJ thank you!