IH-666D - 17oz Duck Slim Straight Cut Jeans - Brown
-
@twin
that would be so rad! -
So here goes @trail and arrow Duck Tails 2020
On the wild side.
Do you still have your Ducks? -
I was looking into this and was confused with the measurements. Why is Size 31 smaller than Size 30 in the measurements chart? This might be discussed already, but would be interesting to know! Your products Iron Heart is detrimental to my wallet!
-
@jothishan:
I was looking into this and was confused with the measurements. Why is Size 31 smaller than Size 30 in the measurements chart? This might be discussed already, but would be interesting to know! Your products Iron Heart is detrimental to my wallet!
IH clothing is made in small batches (compared to the giants of the clothing industry), and often made on mechanical equipment being driven by real people (cutting, sewing, etc.). This means that occasionally there are variations in dimensions between items tagged of the same nominal size, and rarely aberrations like the one you mention.
The IHUK team do their best to be transparent, hente the measuring tables that are based on data they collate from the actual items they sell.
-
@jothishan - @neph93 is absolutely correct. The tagged 31 and 35 666D's would have been from a different run which is why these 2 tag sizes do not follow the same pattern as the rest.
https://www.ironheart.co.uk/forum/index.php?topic=3661.msg606880#msg606880
If you have specific dimensions you are looking for, send me a PM or drop us an email and we try and find the best pair for you.
-
A sizing question on these ones. I have the 666S-21 tag size 31 and I considering to get myself a pair of ducks and this one here is interesting to me, but I have a question on the size. Should I get this in size 31? The 666D, tag size 31 is about 2 inches smaller in waist compared to the 666S-21. Every other measurement between the two is okay for me. Any clues?
-
@jothishan:
A sizing question on these ones. I have the 666S-21 tag size 31 and I considering to get myself a pair of ducks and this one here is interesting to me, but I have a question on the size. Should I get this in size 31? The 666D, tag size 31 is about 2 inches smaller in waist compared to the 666S-21. Every other measurement between the two is okay for me. Any clues?
I was a bit confused when you mentioned that the 666s-21 was two inches bigger than the work pants on the other thread so I compared the measurements. Looks like this batch 666s-21 come up a little bigger in the waist than usual as they are all consistently bigger than tag size. This isn’t unusual.
If your 666s-21 feel big around the waist then you may be ok. If not and they fit well in the waist, you may have to size up in the waist and accept a wider leg.
-
I see your point! May I know how others are dealing with this sizing? Could you throw in your recommendations? Did you guys had to size up?
I had a look at the measurements for tag size 32 and it might work out for me. At checkout I realised that size 32 is sold out. Any ideas when this will be available again?
-
I had a comparison between the measurements for the tag sizes 30, 31 and 32. Looking at them, Tag size 31 fits every single measurement for me except the waist which is pretty tight at 77.5 cm. Ideally I would have expected it to be in the 81 or 82 cm range so that it sits between the tag sizes 31 and 32. The question now is, will the next batch of these in tag size 31 have a slightly bigger waist?
-
Finally got around to getting these hemmed. I wanted a nice clean silhouette and I'm happy with the result.
-
Like that clean look @Palmer ! I need to hem my pair at least 1.5 inches shorter to imitate yours. And I think my ducks aren’t the only IH which need hemming. Maybe next trip to Gosport will see me arrive with a good 4 or 5 pair seeking hemming.
