Random questions to which you seek an answer
-
Sorry, I should have been more clear. What style or cut from IH works best for engineer boots?
Huge question! The simple answer is any and all depending on personal taste, style and what kind of look you want to rock.
What IH cuts do you wear? What is your inseam? Which boots are you considering?
-
As do I on occasion. Today in fact:
I think the 666 is a good cut for engineers. It’s the golden middle way. Not to flappy but wide enough that the jeans fall clear from the boot shaft.
That being said you see guys rocking wide hemmed 634 style jeans with high cuffs and tapered, narrow last engineers (check «vintage_engineer_boots» on IG). The IH .jp crew do the big, wide last, bump toe, double mids with long hemmed wide jeans to great effect.
I really like narrower hems (777, 555) with Wesco’s MP last, but it is not for everyone, nor will I claim that it looks great on me, it probably doesn’t, but I just dig it a lot. Check our «fjorde» on IG for a guy that really kills it in 555’s and Wesco boots.
My personal happy place right now is the 888 cut with engineers. The point is though, there are loads of different ways of doing it. Just get a pair, start wearing them with your favourite jeans and have fun working it out from there.
-
Thanks @Giles and @neph93 for the replies. I was actually thinking of the 666. I normally wear the 555, and while I love the cut, I couldn't fit the shaft of the boot through the hem comfortably. I think that the 666 might give me the "silm" aspect of the 555 while a wider hem. I will also check out the 888s, too, @neph93. I didn't really look at those.
-
@Wlemon speak of the devil…I wore my sz 36 555 01s today with my Vibergs. I prefer them wit my 888s, but I still think they look ok. Given I'm a larger waist, I appreciate the hem is wider too...
-
Those look great, @Stuart.T! When I tried them on with my 555, things didn't go so well.
-
Those look great, @Stuart.T! When I tried them on with my 555, things didn't go so well.
One of the reasons I wondered about your inseam was that if you dont cuff like Mr.T here and have a long inseam that doesn’t require much hemming then it will be a struggle. Cuffing or losing four inches (like I have to) gives you a little more wiggle room.
It’s also worth mentioning that not all Engineer boots are the same. Stuart’s Viberg’s have a relatively short shaft and beautiful but lightweight leather. I can squeeze my 555’s over my burlap Wesco’s (5oz), and just about over my IHWE-5 (9” shaft), but my lined Boss in 7.5oz oil tanned is a non-starter.
-
Reason being is I have been considering getting a pair for this winter after seeing this build from S&S a while ago. Only worry is if they might look a bit daft at Size 7.5D. Chris said I can get the shaft cut a touch narrower than standard but I am on the fence!
-
@Wlemon These are my Pronto/IH PIH10ANT jeans over Wesco Boss boots.These boots are unlined,and the Pronto cut may give you another acceptable option,as well as an excuse to get a pair of jeans in this awesome denim. Pictures with a camera indoors are just not doing the color justice.
-
That is a sweet hem on those engineers @Jett129 . I believe that pronto cut is more comparable with 777's Tham 555's when it comes to taper. This works well with engineers as despite the hem being trim the taper in the calf gives the boot shaft some room.
@AdamJ I'm assuming you have a (ahem…) "cute" inseam to go with the cute feet. The hemming will give you a bit more room. If you're going to have them custom built anyway go for a slightly shorter shaft (9" for example). I said it earlier but if you can make it work the MP toe on slim tapered jeans is badass.
-
@Alex thanks mate. I had the heel remodelled by Felix the Bootmaker in London, as with quite a few Viberg made to order boots, they didn't stick to the requested build. The natural leather heel stack is stained with dark beeswax, and Felix shaped the woodsman heel for me. The are chromexel with Japanese roller buckles. I'm a UK 9 in Vibergs.
I've always liked the idea of a pair of Wesco engineer boots, but the toebox is a bit large for my tastes, and the heel stacks too high. I appreciate you can get bespoke builds, but getting the sizing wrong scares the hell out of me. I might go for a pair of lace up boots some day.
-
I've always liked the idea of a pair of Wesco engineer boots, but the toebox is a bit large for my tastes, and the heel stacks too high. I appreciate you can get bespoke builds, but getting the sizing wrong scares the hell out of me. I might go for a pair of lace up boots some day.
You'll be a US9.5 in Wesco. Get the MP or Morrison toe built on a lowered last. Robert's your father's brother
-
My 555-02 is probably the widest I have in terms of hem due to them being a larger tag size when I was heavier last year. My 555S-16 are Tag 29 and the hem on those is tiny.
That makes sense. Proof that variations between the iterations of a cut can make a meaningful difference.
-
-
I’m thinking of buying this Patagonia Atom Sling pack and was curious what your thoughts are? I like my Patagonia down jacket a lot and like their mission statement and that this pack is made from recycled materials. Only $59 too. I’m leaning heavily towards Patagonia but wanted to know if there were other companies out there you’d recommend? I take my son to the state fair every summer and this pack would be very functional for those occasions
Sent from my iPhone using Tapatalk
Mystery Ranch do a very simple one called the Hip Monkey which is 8l.
Otherwise, I would check out the X-Pak by Codeofbell which will probably provide you with my storage options
Sent from my iPhone using Tapatalk
