Pocketknives/Kitchen Knives/Fixed Blades

[kkibbey23]

Wasn't looking for another Hinderer, but this one followed me home.

I got it second hand, but NIB from a guy who really needed to move it for a unexpected expense so I got the whole thing(ti scale gen 6 on bearings etc for significantly less than retail)

The new updated pivot system is really nice and making me look at XMs again[emoji4]

Sent from my SM-G965U using Tapatalk

[tvenuto]

Massdrop exclusive delica. Unique coated lockbar, supergold2 clad in 410 stainless. The Delica is my favorite edc pattern knife, probably have a dozen at this point.

[mclaincausey]

Nice! Almost looks like a hamon line on there @tvenuto

[tvenuto]

Yea it’s due to the cladding, the line is where the 410 gives way to the SG2 core which actually cuts. It’s razor sharp from the factory too, which is always nice.

Interesting that they went with a clad design on this one. SG2 is a stainless steel, and I’ve usually seen cladding with the carbon steel folders (Superblue, Hap40). Perhaps the high wear resistance makes a clad one cheaper to grind.

[mclaincausey]

I figured it was clad. I have a little Ohta friction folder that is clad in a very dramatic, hamon-like fashion. It's a cool look and certainly practical for some applications, like high carbon core and stainless clad for a cooking knife.

[natehate]

Picked up my first spyderco last weekend. The shaman

And I had a mirror edge out on both my zt0562 and zt0350

Been eyeing the shit out of a few kizers lately too

[summ3rhays]

@tvenuto:

Massdrop exclusive delica. Unique coated lockbar, supergold2 clad in 410 stainless. The Delica is my favorite edc pattern knife, probably have a dozen at this point.

Sweet knife. I almost jumped in on that drop. Delica has been my favorite Spyderco so far.

I just picked up their Ikuchi flipper. Carbon fiber G10 scales and a slim design. I need to switch the clip to lefty.

Sent from my iPhone using Tapatalk Pro

[nurunuru]

That Ikuchi looks great.  Big fan of full flat grinds and compression locks.  I also like that you can open it like you're lighting a Zippo with your thumb.  Kinda fun.

[Cutlasshound]

Heinnie Haynes x Spyderco UKPK

Not owned a Spyderco before and as a result, never understood the hype.  Consider me converted!

Amazing quality, razor sharp and safety stop on it is very solid indeed!

Sent from my iPhone using Tapatalk

[tvenuto]

Very nice.  I'm not usually into slippies since I live in 'murica, but I do like the red G10.  I'll definitely be getting the AEB-L Urban, though, since I've been harassing them to make a knife in AEB-L for years.  I blade swapped a SE delica into the red trainer handle to get a red delica, which is one of my most carried knives.

[natehate]

Kinda went off the other day on bladeforums.com…
kershaw knockout by usamadeblades.com with m390 black wash blade and their different then the normal knock out scales
kizer t1 and the massdrop x ferrum forge crux by we knives


[natehate]

Also grabbed this machinist tool chest from harbor freight to house all my knives and other edc stuff

[Anesthetist]

I have one by Gerstner but it’s pretty full. The HF one looks pretty nice, how’s the quality? Good buys all around.

Sent from my iPhone using Tapatalk

[nurunuru]

New knife for my bunker pants pocket. My old Byrd rescue folder wasn't locking up properly anymore, which was a fine excuse to upgrade to a Spyderco Jumpmaster 

[natehate]

@Anesthetist:

I have one by Gerstner but it’s pretty full. The HF one looks pretty nice, how’s the quality? Good buys all around.

Sent from my iPhone using Tapatalk

it's alright
its definitely no gerstner. its good enough for the 79.99 price tag. the hardwares kinda cheesey. but the wood its self seems okay. it's not pressed partical board or anything so thats nice.
i looked around for vintage ones, but they were all 350 or more and all needed relining. this was a short drive to the states for me which i had to make anyways
i'd recommend it

[Anesthetist]

@natehate:

@Anesthetist:

I have one by Gerstner but it’s pretty full. The HF one looks pretty nice, how’s the quality? Good buys all around.

Sent from my iPhone using Tapatalk

it's alright
its definitely no gerstner. its good enough for the 79.99 price tag. the hardwares kinda cheesey. but the wood its self seems okay. it's not pressed partical board or anything so thats nice.
i looked around for vintage ones, but they were all 350 or more and all needed relining. this was a short drive to the states for me which i had to make anyways
i'd recommend it

Right on, thanks for getting back to me. I might have to make a run to my local shop and check them out

Sent from my iPhone using Tapatalk

[scooter]

[mikebarhoot]

Not knife but DAMMY.

[Stuart.T]

@Cutlasshound how are you finding the Spyderco UK penknife? I live in th UK and carry a UK friendly folding knife everyday and the Spyderco UK penknife has seriously caught my eye.

[Seul]

After 8 or 9 years of using me Sebenza 99% of the time at work, I've not used it since I got the Spyderco Native…

I would never, EVER get rid of me Sebby, but fuck me: Spyderco can seriously make a fun and practical bit of kit!.. It's just easier to use in my line of work... Love it to bits... DougNg: two out of two. Owe you one!..