IHAL-J100 - Iron Heart/Alexander Leathers J100

[Carlos840]

@Giles:

Unfortunately #1 did not work out for @dudewuttheheck .  So it's up for grabs at USD1,000.  XL.

Black goat and red Ventile…

Is it possible to get the measurements?

Shoulders, P to P, bottom hem, arms and back please.

[Giles]

Shoulders 19.5
Length 26
P2P 22.5
Opening 20.5
Arm 25.25

[Carlos840]

@Giles:

Shoulders 19.5
Length 26
P2P 22.5
Opening 20.5
Arm 25.25

Thanks, unfortunately everything is perfect apart from the sleeves that are a good inch to short for me…

[gbougard]

hi

any pic of the red model?
thanks

[Giles]

http://www.ironheart.co.uk/forum/index.php?topic=7220.msg397653#msg397653

[Finkster]

Damn! - this measurements would be perfect … the colour also  ::)  .....

[sisterray]

Has anybody got any advice/opinions on sizing for this jacket.

I'm 5'8" and I was thinking of ordering in the following measurements

Waist - 38 inches
Chest - 41 inches
Shoulders - 18.5 inches
Arm -  25 inches
Back - 26.6 inches

The main area of concern in the back length and arm length. I've measured the back from one of my coats from where the back and the collar meet. This means the bottom would rest at the same level as the top of my jeans back pockets. Some of the pictures in this thread have them being worn about an inch longer.

Any advice would be helpful

[Giles]

Do this:

http://www.simmonsbilt.com/information-menu/how-to-order.html

It'll be built for you….

[sisterray]

Hi,

Does anyone know how long it takes from order to delivery? I ordered about three weeks ago. Do I have much longer to wait? The suspense is kill me, I cannot wait until I get my jacket.

[Giles]

Normally about 3 weeks.  I will chase in the morning…..

[sisterray]

Cheers Giles, much appreciated.

[Ohgre]

Hi, what's the average thickness on the leather for this jacket?  In the natural if it makes a difference.  I've seen a few people refer to it more as a shirt, I like how it looks but would want it to be 1.3mm or greater.

[Giles]

I'll ask the question.  It feels like a jacket and whoever refers to it as a shirt simply has no idea what they are talking about…..And probably has not even seen/touched/wore one....It may look a bit "shirty" but it's a jacket....

[davito]

It was me referring to a leather shirt for j100s used by dirtracers back in the 50s i was not talking about the IH take being a shirt

[Ohgre]

I misunderstood then, thank you for clarifying about the shirt comment! Still interested in the thickness though, thick enough leather has saved my skin a few times in crashes so I pay attention to it.

[Graeme]

Simmons Bilt tend to use 3 oz or 4 oz leather. There's about 0.4 mm to an ounce, so I'd expect somewhere between 1.2 and 1.6 mm thickness.

[Giles]

1.2-1.4…...

[sisterray]

This jacket gets better every day. It is breaking in nicely.

[sisterray]

I must say I have never had an item of clothing get so much attention. So many of my friends and colleagues have asked me about it and complimented it.

The best buy I have made in a long long time. Sad its no longer on the site

Finally I just want to thank Giles for the excellent customer service.

[Giles]

I have 2 black and a red here…......