The Flat Head
-
@Sugar:
Nice work Ben. What size do you take in the 3005? If you wouldn't mind, some measurements BIG style of your pair after a few washes would be grand.
I've got a 33!
I washed it yesterday and it's stretched to the point where I feel they end up at.
Waist: 33
Front rise: 11.25"
Back rise: 15.75"
Thigh: 12.5"
Hem: 9"My recommendation is to get your the waist you want them to end up at and they will most likely fit anyone in the thighs. This will give you a perfect fitted loose fit. If you want a slouchy super comfy for you can go up a size, like Tyler's from self edge.
You def want the 3005 or 3003 (even though I've never seen a fit pic), you know you want some flat head jeans that fit
In fact. I like the cut so much I'll try and hunt down the 3005-A next!
-
Thanks a lot for those measurements Ben. I think I would be a size 32 in the 3005 (which is the same as my old 3001) and you're right, that's the model I'd choose. I'd thought that the rise would be lower than what you've listed, which had held me back. Maybe one day… !
-
For anyone not on superfuture, here's my type 2 jacket after 3 months and about 3 or 4 washes!
-
Looks great Ben!
-
Jacket looks great, nice pics mate.
-
The wabby work shirt fresh out of its (4th) wash:
-
Highly recommended @Broark! Just watch the fit, it can be a tad tricky….
-
In my opinion there is not a better smelling garment than the wabash…no clue why.
-
Awesome, @zatenm !
How would you describe the cut? I really would like to get one of those but I have special requirements (slim with long arms) and the measurements of R&H and Self Edge are different.
-
The old 7012W is exactly what you want if you're slim with long arms.
-
Smells a bit like old paper and vintage fabric even after several washes @grandmasterben
Didn't really notice it before you brought it up - really cool olfactory detail: even the smell of this fabric has character [emoji4]@mental floss the cut can be quite unforgiving. It seems best suited for slim gents with narrow waist and hips and flat belly IMO
VS my size in IH Westerns, i noticed the following:
Much broader shoulders
Slightly tighter chest
Much tighter waist and opening (typically the deal-breaker for many)
Similar arm length- shoulders have an extra 1" which helps the arms length without looking too dropping/low from the shoulders.I wear an S in most IHSHs and a 38 in this. Hope this helps!
-
VS my size in IH Westerns, i noticed the following:
Much broader shoulders
Slightly tighter chest
Much tighter waist and opening (typically the deal-breaker for many)
Similar arm length- shoulders have an extra 1" which helps the arms length without looking too dropping/low from the shoulders.100% Agree. I squeeze into a lot of FH I own. Sucking my gut in all day, but have a great shoulder chest fit (and I don't really have a gut!)
-
Thanks a lot, @grandmasterben @zatenm @Snowy !
Hmm, if I'm XL in IH, would that mean 44 or 46 in FH?
-
New wabash is same pattern but fit is way different.
Firstly the 7014 is really slim for the size. Slimmer than flat head shirts usually are… The body length is shorter, with a smaller shoulder and sleeve, and really slim torso and chest.
I'd recommend going for the 7014wr, which I have. It fits like a normal flat head shirt in the size, I took the same size as my tight fit flat head tees and perfect shirts, and the 7014WR and its perfect.
The 7014 has wacker buttons though, they are plastic instead of the amazing steel powder coated ones in the 7012. But I'm going through Danny to get some old buttons even though they are hella expensive.
If helpful, I could throw up a pic of new wabash, and my flat head tees!
-
@mental:
Thanks a lot, @grandmasterben @zatenm @Snowy !
Hmm, if I'm XL in IH, would that mean 44 or 46 in FH?
I am usually an L in IH and 40R in US sizing, and I have a 44 in the 7012. It's not a perfect fit, sleeves are a bit long, but the weird sizing forced that choice. Happy with it.
-
New wabash is same pattern but fit is way different.
Firstly the 7014 is really slim for the size. Slimmer than flat head shirts usually are… The body length is shorter, with a smaller shoulder and sleeve, and really slim torso and chest.
I'd recommend going for the 7014wr, which I have. It fits like a normal flat head shirt in the size, I took the same size as my tight fit flat head tees and perfect shirts, and the 7014WR and its perfect.
The 7014 has wacker buttons though, they are plastic instead of the amazing steel powder coated ones in the 7012. But I'm going through Danny to get some old buttons even though they are hella expensive.
If helpful, I could throw up a pic of new wabash, and my flat head tees!
I have ordered the 7014w from the SS15 collection. I am having them made to the same sizing specifications as the 7012w Wabash from 2012.
