The Flat Head
-
Looks too tight - have a few shirts myself that didn't work out as planned…
You can take a look at the side seams and see if they are felled seams - this would allow a seamstress to give you 1-2cm in total circumference (this might be all you need).
Sent from my iPad using Tapatalk HD
-
I dunno. I like the fitted look. Always much cleaner. Looking good @Mcclaincausey!
-
Pretty much all FH shirts are sewn with felled seams, rather than lock stitch seams. Are you saying, Foxy, that if a shirt's made with felled seams it's theoretically possible to alter it so that it's actually wider? (I guess by opening up the seam, flattening it out, then finishing it with a lock stitch.)
-
Had this done with 2 of my Samurai shirts - get the felled seam undone, replaced seam with a regular overlock and chain/lock stitch (or safety seam, if combined), finished with a top stitch (chain stitch or lock stitch).
Depending on the folder used for a felled stitch, this could give you some room…if done by pro it should even look OK.It depends a little on the depth of the new side seam (overlock and chain/lock stitch) - if kept around 5-7mm, it should be below the depth of the original depth of the felled seam (folded) and result in a gain of additional circumference. Not much, but sometimes that's all you need...
Sent from my iPad using Tapatalk HD
-
It's tempting but even if I trusted my tailor enough with the job I'm not sure I could bring myself to do it.
-
-
That's a shame. I was hoping for red…
-
What do you guys use a bandana for? I think it looks pretty cool, but I'm not sure if it would serve a purpose for me….
I posted these on sufu, but for any who aren't active on that side of the internet:
And the fit… still as stoked as I was when I first got them
