IHSH-26 & IHSH-26-OD - Short Sleeved Chambrays
-
Very much looking forward to the the LS OD! Too bad Western shirts aren't really to my taste also. shrug
-
why don't you ?
something about it i just can't hang with. i'd much rather roll up my sleeves. hopefully G and haraki do an OD longsleeve(hint hint)…would instantly buy it.
-
I wore my IHSH-26 today. I'm happy to report that the total amount of bleeding for the entire day was less than the first 10 minutes of wear yesterday. So it seems that a majority of the dye rubs of at first contact.
A few comments:
1. The weight is significantly lighter than the mechanics shirt. Nice for days over 30deg like today.
2. Great contrast between the shirt and the silver threads and buttons
3. Most seams are triple chain stitched. Yellow on the inside and silver on the outside.
4. Yellow triple chain stitch runoff with a bar tack stitch to prevent unraveling
5. Fits like a normal IH mediumQuestion: Is the overdye done before of after the shirt is sewn together? The screen printing on the inside of the pocket looks like it was dyed but the stitching has retained a light color.
-
Lefty. In about 3 weeks there will be two new overdyed Chambrays winging their way over from Japan. A work shirt and a western, both LS and both in the 10oz chambray (think IHSH-21) but overdyed…G
That might just be my next purchase. You're the man G.
-
Question: Is the overdye done before of after the shirt is sewn together? The screen printing on the inside of the pocket looks like it was dyed but the stitching has retained a light color.
Dr Pat, All of the IH items that are OD, are done after the garment is constructed. The reason the stitching retains its light color is that it is a poly thread, so does not take up the dye like the cotton. G
-
And again… L or XL on this?
If i went with the light blue chambray... a size L sounds good, but it says post wash its gonna shrink to be the OD sizing, so then the XL would be closer... but what if it doesnt shrink that much??
-
Yeah i started out tryin to wear M in IH but switched over to L and things are working out much better now haha I'm 6'1 165 or so.
Picked this up in size XL, so i guess first things first… give it a soak and cross my fingers eh?
Any soak advice for these peeps?
-
The OD isn't going to shrink at all. The reg should probably just be soaked in temps according to how much shrink you're looking for. Generally, I'm in the same boat as you being between a L and XL as far as the measurements go. Any shrink in the regular probably won't be all that noticeable, but maybe.
Yeah i started out tryin to wear M in IH but switched over to L and things are working out much better now haha I'm 6'1 165 or so.
Picked this up in size XL, so i guess first things first… give it a soak and cross my fingers eh?
Any soak advice for these peeps?
-
Cant wait to get back to ny so i can pick up the OD
-
Damn Pete, I was hoping that I would get that sample back…................
Derek and Kiya told me about that and i was like
Pete is a FXCKING BEAST! haha, good shizzle pete. -
The OD isn't going to shrink at all. The reg should probably just be soaked in temps according to how much shrink you're looking for. Generally, I'm in the same boat as you being between a L and XL as far as the measurements go. Any shrink in the regular probably won't be all that noticeable, but maybe.
Yeah i started out tryin to wear M in IH but switched over to L and things are working out much better now haha I'm 6'1 165 or so.
Picked this up in size XL, so i guess first things first… give it a soak and cross my fingers eh?
Any soak advice for these peeps?
Haha there better be shrinkage in the unwashed version, that's why i got an XL after all
They arrive today though… prob already on my doorstep so i'm gonna hit the tap water as hot as it'll go and toss the shirt in the tub. Buttoned or unbuttoned... would that matter?
-
Yeah, I usually soak shirts unbuttoned, but not because of any rule. I ordered the XL and will FINALLY try to get some pics up during or after a little vacation up to the mitten state. Only a few more days!
-
I received the shirts today… i measured them cause im gonna soak the work shirt, and then i checked the SE site and measurements were way off, i about crapped myself(i tend to overreact online but im totally chill in person haha) till i came here and checked Giles measurements and they are much closer so its all good. The short sleeve heavy denim western shoulders are BARELY 17.5 though... it would have fit a little better closer to 18 i am wondering if i should trade it in for an XL? It fits surprisingly very slim for an L...
I double triple checked the workshirt and this is what i get pre-soak. Then i'll come back and edit for post soak after it has hung and fully dried
Short Sleeve Workshirt - Light Indigo Sz XL:
Chest: 22.5
Vertical Length: 30
Sleeve Length: 11.25
Shoulder Width: 18.5
-
That about looks like what I'm expecting as well as far as the SS workshirt. May want to label the measurements pre- and post-soak, upon editing.
