Heavyweight Denim Championships 2013-2015 - Official Thread

[fanya]

Thanks for the leather explanation.

Currently wearing Iron Hearts, will be wearing MBBs, which is what the belt will be for.  I suppose there is no chance of a 1 3/4 option? I think the IHs will be able to take the 2, might just chance it.  Thanks again

[Megatron1505]

No problem, and if you want a 1.75" belt I will ask the question 

[summ3rhays]

@Megatron1505:

No problem, and if you want a 1.75" belt I will ask the question 

+1 for the 1.75" belt.  I was going to ask as well but was beaten to the punch.

[fanya]

@Megatron1505:

No problem, and if you want a 1.75" belt I will ask the question 

You da man :h5:

[xtcclassic]

My LGC bridle leather belts are 1.75" and are a pretty tight squeeze with most of my jeans. I guess I'll look at my competition pair to see if it will accommodate a 2" belt, because that would be pretty sweet. Otherwise I'd be interested in a 1.75" option as well.

Will the buckles be stitched on or will he use snaps?

[Chris]

Snaps (good) or Chicago screws (better) are the only way to go, in my opinion.  I hate stitched on buckles.

[seawolf]

Agreed!

[xtcclassic]

Chicago screws are the way to go IMHO.

[Megatron1505]

I believe the buckle is attached using snaps/ rivets. I have no idea what a Chicago screw is, or if they are even used in English leather work.

[Megatron1505]

Here are some pictures of belts from the same manufacturer.

[joesaintjohn]

Oooo Daddy Likey

[wunnaz]

niceeeeeeee….!
can't wait to wear with MBB...!!!

+1 for the 1.75" belt.

[summ3rhays]

Those are some righteous belts.

[Giles]

I am pretty sure 2" is too wide for IH (if not, most jeans).  The IHB-01 and 02 are a tight fit at 1.5" wide, the IHB-03 is super tight at 1.7"

[RP]

@Megatron1505:

I have no idea what a Chicago screw is.

I'm sure that some of the Chicago Forum members could arrange for this to be performed on you…

[Megatron1505]

I also think that 2" would be too wide for most jeans, but I was asked if it could be an option. Also in total agreement that 1.5" is the way to go with a belt.

[Megatron1505]

@RP:

@Megatron1505:

I have no idea what a Chicago screw is.

I'm sure that some of the Chicago Forum members could arrange for this to be performed on you…

Not sure this would be a good thing 

[Giles]

@Megatron1505:

I also think that 2" would be too wide for most jeans, but I was asked if it could be an option. Also in total agreement that 1.5" is the way to go with a belt.

@RP:

@Megatron1505:

I have no idea what a Chicago screw is.

I'm sure that some of the Chicago Forum members could arrange for this to be performed on you…

And this is the boring version…

[zwer]

Don't Chicago screws have a tendency to come undone? It could just be my experience. Also, I've always been too lazy to buy some Loctite.

[injunjack]

@zwer:

Don't Chicago screws have a tendency to come undone? It could just be my experience. Also, I've always been too lazy to buy some Loctite.

Girlfriends/wifes nailpolish does the trick