IH-634S-RAW - 21/23 ounce raw straight cut

[rocket]

@Blackheart:

… on Sunday with the pics.

 

[Blackheart]

Yes Finn, unhemmed. I want to see how much actual shrinkage occurs before I possibly
hem them. I like to cuff my jeans but if these are way too long on me I'll get them shortened
but not until I soak them a couple more times.

[Finn666]

sounds like a plan to me ;)…

[Blackheart]

Raw denim keeps shrinking, after 3 soaks that should be about it so I'll see what we come up
with and post pics after the 2nd and 3rd soaks as well.

[TinMan]

G,
My email has been jacked up all day.  I hope you got the last one I sent you about the unhemmed 40.5 pair. let me know if you did not get it.

[Just_KC]

just received my IH-634S-RAW. seriously, this jeans is ridiculously stiff. literally feels like i'm wearing a cast. i had to lie on my bed to remove my jeans.

gonna soak it tomorrow. hopefully it doesn't shrink more than an inch on the inseam. fingers cross

[Forrest6775]

Out for delivery. Should have taken the day off!

[TinMan]

@Blackheart:

kit the waist and inseam length were the same as the size listed on the IH sizing page,
34 waist was 35 pre soak and the 36 length measured 37 pre soak.
I'll put up post soak measurements on Sunday with the pics.

Blackheart,
did you agitate or just soak,  I think you get more shrinkage if you agitate.  If I remember correctly Haraki recommended agitation on the 634sr.  anyway I was just curious

[TinMan]

G,
will hemming the 40.5 pair change the opening of the hem or will it still be 9.5 after when you are done hemming.

[Guest]

Malaka. I think I'm going to have to super hot soak everything except the top block. Should make for an interesting job.

[Finn666]

@Shoreman:

Malaka. I think I'm going to have to super hot soak everything except the top block. Should make for an interesting job.

sounds good to me…don´t forget all those pics

[Giles]

@TinMan:

G,
will hemming the 40.5 pair change the opening of the hem or will it still be 9.5 after when you are done hemming.

Here's the math…...

Knee to hem is about 20"  The taper from knee to cuff is 1/2 inch

Work out how much you are going to chop off (let's call that m)

New opening = 9.5 + (m/20*0.5)

[TinMan]

Shit I have to do math

thanks G

[Blackheart]

Tinman, no agitation, I just soaked them flat in the bathtub. I posted post soak measurements
in the RAW WAR thread, they did shrink but not drastically. 

[Finn666]

well, hello darling… 

for more pics check:
http://www.ironheart.co.uk/forum/index.php?topic=2214.msg129389#msg129389

[ronaldlsh]

Seriously, I can't get the buttons into the button holes!

[Blackheart]

Go Finn!!!

ronald, try stretching them with needle nose pliers if you have a pair…

[ronaldlsh]

Done! Into the water now!

[zhivago]

Try gloved hands ron

[Giles]

Ron, these should do the trick: