IH-634S-RAW - 21/23 ounce raw straight cut

[madmonday]

@Giles:

I have "pre-orders" for 73 pairs, but probably only about 50% of the people who have completed the form will actually purchase.

If you complete this form, you will be emailed when they arrive in UK:

http://ironheart.wufoo.eu/forms/ih634sraw/

so your chances for scoring two pair sound pretty good

[Guest]

Ok, so I just went through the 634s thread and really liked the fit on simon626 and Lando and would very much like a similar fit out of a pair of jeans I'm going to wear everyday. Given that I found the top block in the IHxB01 size 31 to be too tight, how should I size these?

Edit: I'll just wait for the measurements to drop and go from there.

[injunjack]

well, BB's have tighter top block than 634S…I'd say same size 634S should give you more room in top block area. 634S  rise is lower than in BB.

[TinMan]

@Giles:

There is a total of 158 being made.  I am taking 85 of them, the rest going to various retailers.  I have "pre-orders" for 73 pairs, but probably only about 50% of the people who have completed the form will actually purchase.

If you complete this form, you will be emailed when they arrive in UK:

http://ironheart.wufoo.eu/forms/ih634sraw/

still thinking these will show up the middle of this month?

[Giles]

http://www.ironheart.co.uk/forum/index.php?topic=1450.msg121686#msg121686

[TinMan]

I missed that post…...... Damb that was rookie mistake.  Can not wait

[taksaha]

If I size up in these, would it be possible to layer them with the IH-666-XHS?

[thomasnunnally]

@taksaha:

If I size up in these, would it be possible to layer them with the IH-666-XHS?

My brain hurts.

[bagley920]

Layer 2 pairs of jeans? Am I reading that right? and 23 and 25oz jeans no less?

[taksaha]

Jeans layering is the natural development for anyone who likes to layer shirts, but who over time starts to find this trivial.

Besides, I have 6oz legs, so I need all the stiffness I can get from denim in order to not fall over.

Probably should have included some kind of smiley 

[kit99bar]

Just read through this entire thread.

1. lol at the repeated questions that have already been answered.  Giles needs a beer after this thread
2. love how the sizing is pretty spot on.  The size 30 634s are perfect for me
3. x-mas gift to myself!

@Giles:

Sizing post soak on the waist 33 sample.  I suspect there is a little more shrinkage to go….

Edited to reflect more accurate IH-634S measurements

[Giles]

Giles needs a beer after most threads…

[jimmy]

I didn't think Giles ever stops drinking…...

[Giles]

My fame flows before me….........

[Finn666]

@Giles:

Giles needs a beer after most threads…

having one for you right now…

[JLG]

So, this is going to be the last production run of 21/23 Raw in the 634S cut, right (as in never to available directly from IH again)? I just got another pair of Busters, but don't want to miss out on these. Thanks!

[Giles]

Before I initiated this run there was enough 21/23 for approx 200 pairs jeans.  I am doing approx 160 in this run.  If we have enough of the denim left over after this run, I will do something with it - as long as there is enough for a min 50 pairs.  None of what I am doing will be available directly from Japan.

[hangten]

just to refresh my memory, the 21/23 denim is too thick to make type 3 jackets correct?

[madmonday]

that is correct hang10

[Giles]

People.

Pre interest on these has been extremely high.  I have almost as many forms filled out as I have jeans coming in.  I have not done a supply and demand analysis, but I suspect if you all still want a pair, we will run out of some sizes before everyone has got what they wanted.

On that basis, I will send emails out when they are available.  Those emails will be sent out in the order that I received a completed form.

If when you see the sizing chart, you need to change your size, that is not a problem.