IH-634S-RAW - 21/23 ounce raw straight cut

[MikeC]

G, are you getting a decent amount of 36s?

[ronaldlsh]

Really a tough decision.

My 634sb was a tad too baggy for my liking, and I got it slightly tapered(about half an inch). The waist was untouched, and stretched out to be perfect. My 36 Beatle busters are a goner for me. The waist and thighs are very tight…

I also have a pair of samurai 0500xx in size 35. The waist is a little tight to begin with, but also stretched ou to be ok.
My skulls 5010xx is w36 as well, and the fit is good.

Would it be better to get a pair 35 and give it a hot soak. Or is it safer to get 36 and give it a super hot soak for a slimmer profile?

Such dilemma, sucks like hell.... I hope someone would be able to help me up with this.. Thanks!

@kit99bar:

If it's possibly too small you can just cold soak and cold hand wash them.  One of the benefits of RAW denim.
(I prefer non-RAW so I can just get a perfect size from the start though)

@ronaldlsh:

I'm hoping I can size down (wearing 36 for 634sb) on these.. But not sure if it's advisable for me to do so…

[kit99bar]

If the measurements are good this replaces the 710blks I was going to get.  Too genius

[Giles]

@MikeC:

G, are you getting a decent amount of 36s?

14x35
10x36

[Giles]

@ronaldlsh:

My 634sb was a tad too baggy for my liking, and I got it slightly tapered(about half an inch). The waist was untouched, and stretched out to be perfect.

And what does the waist measure now?

[ronaldlsh]

Whoops, it's the pair I sent to The Works.

[Jordan23]

Is there still a 33 available?

[dave]

They aren't even out yet.. plenty of time left to run out of your size

[Giles]

There is a total of 158 being made.  I am taking 85 of them, the rest going to various retailers.  I have "pre-orders" for 73 pairs, but probably only about 50% of the people who have completed the form will actually purchase.

If you complete this form, you will be emailed when they arrive in UK:

http://ironheart.wufoo.eu/forms/ih634sraw/

[Jordan23]

Done!…waiting!

[seren]

What if I completed the form for one pair but would buy two pairs?

[madmonday]

@Giles:

I have "pre-orders" for 73 pairs, but probably only about 50% of the people who have completed the form will actually purchase.

If you complete this form, you will be emailed when they arrive in UK:

http://ironheart.wufoo.eu/forms/ih634sraw/

so your chances for scoring two pair sound pretty good

[Guest]

Ok, so I just went through the 634s thread and really liked the fit on simon626 and Lando and would very much like a similar fit out of a pair of jeans I'm going to wear everyday. Given that I found the top block in the IHxB01 size 31 to be too tight, how should I size these?

Edit: I'll just wait for the measurements to drop and go from there.

[injunjack]

well, BB's have tighter top block than 634S…I'd say same size 634S should give you more room in top block area. 634S  rise is lower than in BB.

[TinMan]

@Giles:

There is a total of 158 being made.  I am taking 85 of them, the rest going to various retailers.  I have "pre-orders" for 73 pairs, but probably only about 50% of the people who have completed the form will actually purchase.

If you complete this form, you will be emailed when they arrive in UK:

http://ironheart.wufoo.eu/forms/ih634sraw/

still thinking these will show up the middle of this month?

[Giles]

http://www.ironheart.co.uk/forum/index.php?topic=1450.msg121686#msg121686

[TinMan]

I missed that post…...... Damb that was rookie mistake.  Can not wait

[taksaha]

If I size up in these, would it be possible to layer them with the IH-666-XHS?

[thomasnunnally]

@taksaha:

If I size up in these, would it be possible to layer them with the IH-666-XHS?

My brain hurts.

[bagley920]

Layer 2 pairs of jeans? Am I reading that right? and 23 and 25oz jeans no less?