IH-634S-RAW - 21/23 ounce raw straight cut

[injunjack]

I'm confident that they are made so that they SHRINK TO normal 634S measurements. I expect no more…:)

[Giles]

That is the plan…

[Giles]

Completion date getting closer…....

"They are scheduled to be done on Dec 10th, he just sent the labels today
which is the last process of the production run! The leather have been
applied oil by hand one by one....please wait a little more..."

[injunjack]

wooo-hoo!!!

[Jordan23]

I am not sure!…need some inspiration!

[MikeC]

G, are you getting a decent amount of 36s?

[ronaldlsh]

Really a tough decision.

My 634sb was a tad too baggy for my liking, and I got it slightly tapered(about half an inch). The waist was untouched, and stretched out to be perfect. My 36 Beatle busters are a goner for me. The waist and thighs are very tight…

I also have a pair of samurai 0500xx in size 35. The waist is a little tight to begin with, but also stretched ou to be ok.
My skulls 5010xx is w36 as well, and the fit is good.

Would it be better to get a pair 35 and give it a hot soak. Or is it safer to get 36 and give it a super hot soak for a slimmer profile?

Such dilemma, sucks like hell.... I hope someone would be able to help me up with this.. Thanks!

@kit99bar:

If it's possibly too small you can just cold soak and cold hand wash them.  One of the benefits of RAW denim.
(I prefer non-RAW so I can just get a perfect size from the start though)

@ronaldlsh:

I'm hoping I can size down (wearing 36 for 634sb) on these.. But not sure if it's advisable for me to do so…

[kit99bar]

If the measurements are good this replaces the 710blks I was going to get.  Too genius

[Giles]

@MikeC:

G, are you getting a decent amount of 36s?

14x35
10x36

[Giles]

@ronaldlsh:

My 634sb was a tad too baggy for my liking, and I got it slightly tapered(about half an inch). The waist was untouched, and stretched out to be perfect.

And what does the waist measure now?

[ronaldlsh]

Whoops, it's the pair I sent to The Works.

[Jordan23]

Is there still a 33 available?

[dave]

They aren't even out yet.. plenty of time left to run out of your size

[Giles]

There is a total of 158 being made.  I am taking 85 of them, the rest going to various retailers.  I have "pre-orders" for 73 pairs, but probably only about 50% of the people who have completed the form will actually purchase.

If you complete this form, you will be emailed when they arrive in UK:

http://ironheart.wufoo.eu/forms/ih634sraw/

[Jordan23]

Done!…waiting!

[seren]

What if I completed the form for one pair but would buy two pairs?

[madmonday]

@Giles:

I have "pre-orders" for 73 pairs, but probably only about 50% of the people who have completed the form will actually purchase.

If you complete this form, you will be emailed when they arrive in UK:

http://ironheart.wufoo.eu/forms/ih634sraw/

so your chances for scoring two pair sound pretty good

[Guest]

Ok, so I just went through the 634s thread and really liked the fit on simon626 and Lando and would very much like a similar fit out of a pair of jeans I'm going to wear everyday. Given that I found the top block in the IHxB01 size 31 to be too tight, how should I size these?

Edit: I'll just wait for the measurements to drop and go from there.

[injunjack]

well, BB's have tighter top block than 634S…I'd say same size 634S should give you more room in top block area. 634S  rise is lower than in BB.

[TinMan]

@Giles:

There is a total of 158 being made.  I am taking 85 of them, the rest going to various retailers.  I have "pre-orders" for 73 pairs, but probably only about 50% of the people who have completed the form will actually purchase.

If you complete this form, you will be emailed when they arrive in UK:

http://ironheart.wufoo.eu/forms/ih634sraw/

still thinking these will show up the middle of this month?