IH-634-XHS - 25oz Selvedge Denim Straight Cut Jeans - Indigo

[georgeel]

@rocket:

totally can understand, just interested to see what can happen….

If you are very very very brave, you can always overdye your pair on your own… I did it on an old Levi's jacket, and the result was pretty satisfying. But with a denim so extreme and peculiar, I don't think it's worth to try.

[rocket]

I don't need the ODs, my post was in context with Giles saying that they had lost a run of jeans while doing the OD job…

and I'm with you I would not try that on the 25oz...

[WGIC]

Alright guys, I need some help.  I am about to pull the trigger on a pair of these but I am a little concerned about the size.  I have the 634s in 36 waist and they fit well. They feel kind of tight but not bad.  I have 634s-b in 36 and they fit so much better than my regular 634s (they just seem to me more roomy without being baggy. They also are longer).  I have 634s in 38 and I like them for riding the bobber around and stuff like that. They are baggy and not the best fit for me but I love the room they provide for movement.

WHAT SIZE SHOULD I ORDER?

I don't want to screw up on a $500 pair of jeans.

[Beatle]

36…................

[rocket]

I have a 634S in 34 and a 634XHS in 34 and the XHS is definitive a bit more roomy, so I would say that you are fine with a 36…

[Giles]

+1

[paulc]

Def 36…i have the 634SR in a 36 which are comfy but on the border of tight.
As Rocket said,the 25oz just give you a touch more breathing space..they were spot on straight away.

[Fadez]

Hey everyone.  Got a questions for all you 634 XHSers out there.  Has anyone sized up on this? I'm debating between a 31 and 32 waist.  I'm not sure what I should get.  Has anyone had experience with these that are too tight or too loose?  Thanks in advance for your input.

[Giles]

Sized up from what?  Need comparative data…...

[Fadez]

G-

I've tried on the regular 634S at size 31 and had a solid fit.  I was wondering if maybe I should get a size 32 due to the weight of the denim. I also plan on gaining a little weight, especially in my lower body. Thanks for your help.

[ALEX1976]

when u wear 31 in 634 s than get a 30 waist in 634xhs….the 25 oz is a tad looser-waist-legs!

[Fadez]

Thanks for the advice Alex.  I'm def going for a roomier fit.  I've exhausted myself on slimmer fits.  Do you wear the 33 in XHS and 34 in 634S?

[Giles]

I Wear 33 in each, can't tell the difference.

If the 634S were new and effectively unworn, then you could get away with the same size in the XHS, but they will stretch less over time than the 634S.  Sizing up one will give them more life on you…

[ALEX1976]

I wear 634 sr in 34-Busters SBG in 34- DC 4001 in 34
Flat Head 1001 in 34-634 xhs 25 oz in 33 waist

The waist of a 634xhs 25oz (waist 33) is the same how a DC4001,Busters SBG or 634sr(waist 34)!
FACT!
The legs are a tad looser too(634s vs 634xhs -same size)

[Fadez]

Thanks for the info Alex.  I'll be doing some heavy comparing today.

[ALEX1976]

good luck…the 25 oz denim is amazing!
absolutly unmatched!!!

[Fadez]

Thanks to everyone who's been helping me out with getting these jeans.  Apparently all the working out I've done recently has put a few inches on my waist that I didn't think existed.  I measured my two pairs of N&F today by the IH guide. One is 34" and the other is 35".  I've got my sights on the 34" now.  My new agenda is the inseam.  If 34" is my end result inseam, would getting it hemmed to 35" give me a solid cuff if desired? Once again, thanks for the help.

[injunjack]

go for 1,5"-2" cuff. Thinner cuffs don't look good IMO

[van Olzon]

[rocket]

^nice….